Fujitsu Time Clock ETERNUS2000 User Manual
ETERNUS VSS Hardware Provider  
Installation Information  
January 2015  
 
ETERNUS VSS Harware Provider Installation Information  
About ETERNUS VSS Hardware Provider  
ETERNUS VSS Hardware Provider (hereinafter referred to as "VSSHP") is a program that is compatible with the  
Microsoft Volume Shadow Copy Service (hereinafter referred to as "VSS") interface, and that creates shadow  
copies of volumes in an ETERNUS Disk storage system.  
Use of this software with backup software and writer software supporting VSS delivers online backup using the one  
point copy (snapshot) capability of Advanced Copy function available with ETERNUS Disk storage systems.  
3
Copyright 2012-2015 FUJITSU LIMITED  
 
 
ETERNUS VSS Harware Provider Installation Information  
Operating System Versions  
The following tables show the version of Windows Servers supported by VSSHP.  
Operating System  
VSSHP Version Level  
1.1.0 or later  
Microsoft® Windows Server® 2008 Standard  
Microsoft® Windows Server® 2008 Enterprise  
Microsoft® Windows Server® 2008 Datacenter  
(Server Core is not supported.)  
Microsoft® Windows Server® 2008 R2 Standard  
Microsoft® Windows Server® 2008 R2 Enterprise  
Microsoft® Windows Server® 2008 R2 Datacenter  
(Server Core is supported.)  
1.4.0 or later  
(The support of Server Core is  
since 1.5.0.)  
Microsoft® Windows Server® 2012 Standard  
Microsoft® Windows Server® 2012 Datacenter  
(Server Core is supported.)  
2.1.0 or later  
2.1.0 or later  
Microsoft® Windows Server® 2012 R2 Standard  
Microsoft® Windows Server® 2012 R2 Datacenter  
(Server Core is supported.)  
For Windows Server 2008  
The architecture types of x86 (32-bit), x64 are supported.  
The software levels of SP1 (no SP applied) and SP2 are supported.  
For Windows Server 2008 R2  
The architecture types of x64 is supported.  
The software levels of SP0 (no SP applied) and SP1 are supported.  
For Windows Server 2012  
The architecture types of x64 is supported.  
For Windows Server 2012 R2  
The architecture types of x64 is supported.  
【Caution】  
- The environment where BitLocker drive coding function was installed in does not support it.  
- The registry in conjunction with the partition is left and may accumulate, when I delete the copying of GPT  
(GUID Partition Table). As a result of having continued use without deleting the registry, the phenomenon  
that backup is terminated abnormally by having exceeded an upper limit level of the registry is confirmed.  
[prevention]  
DevCon.exe which Microsoft provides delete the unnecessary registry.  
There is no modified information of the OS at present.  
4
Copyright 2012-2015 FUJITSU LIMITED  
 
 
ETERNUS VSS Harware Provider Installation Information  
Disk Storage Systems  
VSSHP supports the following disk storage systems.  
ETERNUS DX60  
ETERNUS DX80  
ETERNUS DX90  
ETERNUS DX60 S2  
ETERNUS DX80 S2  
ETERNUS DX90 S2  
ETERNUS DX60 S3  
ETERNUS DX100 S3  
ETERNUS DX200 S3  
ETERNUS DX200F  
ETERNUS DX400 series  
ETERNUS DX400 S2 series  
ETERNUS DX500 S3  
ETERNUS DX600 S3  
ETERNUS DX8000 series  
ETERNUS DX8000 S2 series  
ETERNUS2000 (model 100 or higher)  
ETERNUS4000 (model 300 or higher)  
ETERNUS8000  
【Caution】  
The registration of the Advanced Copy license is required for some models.  
Please refer to the manual for details of the setting of the ETERNUS disk storage system for the Advanced  
Copy function use for the registration of the license and the setting of the size of the copy table, etc.  
ETERNUS DX60, ETERNUS DX80, ETERNUS DX90  
Disk Storage System  
VSSHP Version Level  
1.3.0 or later  
ETERNUS DX60  
ETERNUS DX80  
ETERNUS DX90  
1.4.0 or later  
ETERNUS DX60 S2, ETERNUS DX80 S2, ETERNUS DX90 S2  
Disk Storage System  
VSSHP Version Level  
2.0.1 or later  
ETERNUS DX60 S2  
ETERNUS DX80 S2  
ETERNUS DX90 S2  
ETERNUS DX60 S3, ETERNUS DX100 S3, ETERNUS DX200 S3, ETERNUS DX200F  
Disk Storage System  
ETERNUS DX60 S3  
VSSHP Version Level  
2.1.1 or later  
ETERNUS DX100 S3  
ETERNUS DX200 S3  
ETERNUS DX200F  
2.1.0 or later  
5
Copyright 2012-2015 FUJITSU LIMITED  
 
       
ETERNUS VSS Harware Provider Installation Information  
ETERNUS DX400 series  
Disk Storage System  
VSSHP Version Level  
1.4.0 or later  
ETERNUS DX400 series  
ETERNUS DX400 S2 series  
Disk Storage System  
VSSHP Version Level  
2.0.1 or later  
ETERNUS DX400 S2 series  
ETERNUS DX500 S3, ETERNUS DX600 S3  
Disk Storage System  
VSSHP Version Level  
2.1.0 or later  
ETERNUS DX500 S3  
ETERNUS DX600 S3  
ETERNUS DX8000 series  
Disk Storage System  
VSSHP Version Level  
1.4,0 or later  
ETERNUS DX8000 series  
ETERNUS DX8000 S2 series  
Disk Storage System  
VSSHP Version Level  
2.0.1 or later  
ETERNUS DX8000 S2 series  
ETERNUS2000  
Disk Storage System  
VSSHP Version Level  
Not supported  
ETERNUS2000 model 50  
ETERNUS2000 model 100  
ETERNUS2000 model 200  
1.1.0 or later  
ETERNUS4000  
Disk Storage System  
VSSHP Version Level  
Not supported  
ETERNUS4000 model 80  
ETERNUS4000 model 100  
ETERNUS4000 model 300  
ETERNUS4000 model 400  
ETERNUS4000 model 500  
ETERNUS4000 model 600  
1.1.0 or later  
6
Copyright 2012-2015 FUJITSU LIMITED  
 
             
ETERNUS VSS Harware Provider Installation Information  
ETERNUS8000  
Disk Storage System  
VSSHP Version Level  
ETERNUS8000 model 700  
ETERNUS8000 model 800  
ETERNUS8000 model 900  
ETERNUS8000 model 1100  
ETERNUS8000 model 1200  
ETERNUS8000 model 1300  
1.1.0 or later  
About the support of Storage Cluster function  
In following the ETERNUS disk storage system, Storage Cluster function is available.  
Disk Storage System  
Firmware Version Level  
ETERNUS DX200 S3  
ETERNUS DX200F  
ETERNUS DX500 S3  
ETERNUS DX600 S3  
V10L30 or later  
The following tables show the combination of the source copy volume, the destination copy volume and advanced  
copy function supported by VSSHP.  
Volume  
Advanced Copy  
source  
destination  
OPC  
Yes  
QuickOPC  
SnapOPC  
SnapOPC+  
No  
TFOV  
TFOV  
Open  
TFOV  
Yes  
No  
No  
No  
Open/SDV  
TFOV  
No  
No  
No  
No  
No  
No  
TFOV： Transparent Failover Volume  
Open： Standard Volume  
SDV： Snap Data Volume  
【Caution】  
- In VSSHP, Storage Cluster must be configured only the same models of the ETERNUS disk storage system.  
- In VSSHP, to operate Open/SDV and TFOV together in a host cannot be supported.  
7
Copyright 2012-2015 FUJITSU LIMITED  
 
   
ETERNUS VSS Harware Provider Installation Information  
Host interface  
The following tables show Host interfaces supported by VSSHP.  
Host interface  
FC  
VSSHP Version Level  
1.1.0 or later  
1.1.0 or later  
1.1.0 or later  
Not supported  
iSCSI  
SAS  
FCoE  
8
Copyright 2012-2015 FUJITSU LIMITED  
 
 
ETERNUS VSS Harware Provider Installation Information  
Backup software (Requester) and Server application (Writer)  
The following tables show the Backup software (requester) and the Server application (writer) supported by the  
VSSHP.  
Backup software  
Backup software  
VSSHP Version level  
1.2.0 or later  
ETERNUS SF AdvancedCopy Manager 13.4.1 or later (*1)  
CA ARCserve Backup r12.5 / r15 / r16 / r16.5  
Microsoft System Center Data Protection Manager 2010 / 2012  
NetWorker 7.5 / 7.6  
1.2.0 or later  
1.5.0 or later  
1.5.0 or later  
Quest NetVault Backup 8.2 / 8.5.X / 8.6  
Symantec Backup Exec 12.5 for Windows Servers  
Symantec Backup Exec 2010 R2  
Symantec NetBackup 7  
1.2.0 or later  
1.2.0 or later  
1.5.0 or later  
1.5.0 or later  
2.1.0 or later  
SEP Sesam 4.2  
*1：ETERNUS SF AdvancedCopy Manager comes with a VSSHP package. Please use this package, or use the latest package get from our  
download page.  
Reference : Windows Server Backup of Windows Server 2008 (version after that) cannot be used because it does  
not operate in the hardware provider that the vender offers.  
9
Copyright 2012-2015 FUJITSU LIMITED  
 
   
ETERNUS VSS Harware Provider Installation Information  
Server application  
Server application  
Remarks  
Hyper-V VSS Writer (*1)(* 2)  
Microsoft Exchange Server 2007 / 2010 / 2013  
Microsoft SQL Server 2005 / 2008  
Oracle Database 11g Release 2  
System Writer  
（NTFS File system: Windows Server 2008 / 2008 R2 / 2012 / 2012 R2）  
*1：Hyper-V since Windows Server 2008 R2  
*2：The disk where guest OS is stored can be backed up from host OS. The following guests OS can back up.  
・Microsoft® Windows Server® 2003 R2, Standard Edition Service Pack 2  
・Microsoft® Windows Server® 2003 R2, Enterprise Edition Service Pack 2  
・Microsoft® Windows Server® 2008 Standard Service Pack 2  
・Microsoft® Windows Server® 2008 Enterprise Service Pack 2  
・Microsoft® Windows Server® 2008 R2 Standard  
・Microsoft® Windows Server® 2008 R2 Enterprise  
・Microsoft® Windows Server® 2008 R2 Datacenter  
・Microsoft® Windows Server® 2012 Standard  
・Microsoft® Windows Server® 2012 Datacenter  
・Microsoft® Windows Server® 2012 R2 Standard  
・Microsoft® Windows Server® 2012 R2 Datacenter  
10  
Copyright 2012-2015 FUJITSU LIMITED  
 
 
ETERNUS VSS Harware Provider Installation Information  
Virtualization environment  
Virtualization environment  
Operation on host OS  
Operation on guest OS  
Not Supported  
Windows Server 2008 Hyper-V  
Windows Server 2008 R2 Hyper-V  
Windows Server 2012 Hyper-V  
Windows Server 2012 R2 Hyper-V  
Not Supported  
Supported  
Supported  
Supported  
Not Supported (*2)  
Not Supported (*2)  
Not Supported (*2)  
VMware vSphere 4.1  
VMware vSphere 5  
N/A  
N/A  
Supported (*1)  
Supported (*1)  
*1：Notes  
It is necessary to meet the following requirements.  
- The source disk must be the type of Physical RDM (A physical disk and Raw Device Mapping are  
specified. )  
defined with VMware vSphere.  
- When servers are constructed Transportable Copy Configuration and the backup server is made a  
Virtualization server, the destination disk must be the type of Physical RDM.  
- When servers are constructed Transportable Copy Configuration and you copy the disk where guest OS  
was installed, the backup server must be a physical server, the production server recognizes the target  
disk.  
(The environmental setting equal with the case to back up Hyper-V virtual machine with Transportable Copy  
Configuration is necessary.)  
*2：Notes  
VSSHP supports only when use it with ETERNUS SF AdvancedCopy Manager.  
VMware vSphere environment  
The combination of the backup software and the server application supported by VSSHP in VMware vSphere  
Environment is as follows.  
Server Configuration  
Operation types  
Server  
application  
Transportable  
Copy  
Configuration  
Target  
disk pool  
operation  
Backup software  
OS  
Local Copy  
Configuration  
Copy set  
operation  
ETERNUS SF  
AdvancedCopy  
Manager 15.0 or Server 2007 /  
later (*1) 2010 / 2013  
Microsoft  
Exchange  
Windows Server 2008  
R2  
-
Yes  
Yes  
No  
*1：In the combination ETERNUS SF AdvancedCopy Manager 15.0 (or later) + VSSHP2.0.1(or later), the  
Exchange data base can be backed up by using "Microsoft Exchange Server" as a server application.  
11  
Copyright 2012-2015 FUJITSU LIMITED  
 
   
ETERNUS VSS Harware Provider Installation Information  
About This Installation Information  
This document is devoted to providing technical information. The contents of this document may be modified without  
any prior notice.  
Please contact FUJITSU LIMITED if you find any error in descriptions.  
FUJITSU LIMITED is not responsible for indemnity that might be caused by the contents in this documentation or any  
damage related to contents in this documentation.  
FUJITSU LIMITED  
http://www.fujitsu.com/storage/  
12  
Copyright 2012-2015 FUJITSU LIMITED  
 

Dyson Vacuum Cleaner DC 31 User Manual
Extron electronic Switch SWP123 User Manual
Fellowes Paper Shredder 4800CC User Manual
Fender Stereo Amplifier PR 290 User Manual
Fisher Price Motorized Toy Car J4512 User Manual
Frigidaire Dehumidifier 2020266A0406 User Manual
Frigidaire Dishwasher FGBD2438PB User Manual
Gaggenau Fryer VF 230 User Manual
Gefen Switch EXT HDMI13 242 User Manual
Gemini Musical Instrument MX 02 User Manual