Dishwasher
Use & Care Manual
Product Registration
MDB100, MDB110
MDB125, F71C12
Models:
Card
Please fill in completely, sign and
return promptly!
Safety
Instructions............. 2-3
Operating
Instructions............. 4-6
Preparing and
Loading Dishes....... 7-8
Dishwasher
Dispenser and
Detergents............. 9-11
Factors Affecting
Performance ............ 12
Record All Information
For Future Reference
Care and
Cleaning ...............13-14
Brand:
Purchase Date:
Model #:
Changing Color
Panels...................15-16
Serial #:
Solutions to
Common
(located on right side of tub)
Dishwashing
Problems ..............17-20
Questions? 1-800-444-4944
(United States)
1-800-661-9913
(Canada)
Consumer Services
Warranty & Service .... 21-24
Versión en español ......... 22
Visit Frigidaire Company’s
Web Site at
P/N 154336703
(9812)
READ AND SAVE THESE INSTRUCTIONS
1
Important Safety Instructions
(continued)
• Do not wash plastic items
unless marked ‘‘dishwasher
safe’’ or the equivalent. Check
with manufacturer for
• Under certain conditions,
hydrogen gas may be
produced in a hot water
system that has not been
used for 2 weeks or more.
HYDROGEN GAS IS
EXPLOSIVE. If hot water
system has not been used for
such a period, before using
dishwasher, turn on all hot
water faucets and let water
flow from each for several
minutes. This will release any
accumulated hydrogen gas.
HYDROGEN GAS IS
recommendations, if not
marked. Items that are not
dishwasher safe may melt
and create a potential fire
hazard.
• If the dishwasher drains into a
food disposer, make sure
disposer is completely empty
before running dishwasher.
• Disconnect electrical power to
dishwasher before servicing.
FLAMMABLE. Do not smoke
or use an open flame during
this time.
• Repairs should be done by a
qualified technician.
• Do not store or use
combustible materials,
gasoline or other flammable
vapors and liquids in the
vicinity of this or any other
appliance.
• Do not tamper with controls.
• Do not touch the heating
element during or immediately
after use.
• When loading items to be
washed:
- Locate sharp items and
knives so that they are not
likely to damage the door seal
or tub.
- Load sharp items and
knives with the handles up to
reduce the risk of cut-type
injuries.
SAVE THESE
INSTRUCTIONS
Instructions appearing in this Use & Care Manual are not meant to cover every possible
condition and situation that may occur. Practice common sense and caution when installing,
operating, and maintaining any appliance.
©1998 White Consolidated Industries, Inc.
Printed in U.S.A.
All rights reserved.
3
Operating Instructions
The model number can be found on right side of tub just inside
the door. Features and appearance may differ depending on the
model you selected.
Getting Started
1. Load dishwasher (See Preparing and Loading Dishes).
2. Add detergent (See Dishwasher Dispenser & Detergents).
3. Add rinse aid, if needed (See Rinse Aid).
4. Turn dial clockwise to select cycle (See Wash Cycle Selections).
5. Select desired energy OPTIONS (See Energy Options).
6. Run hot water faucet nearest dishwasher until water is hot. Turn
water off.
7. To start, close door to latch.
4
Operating Instructions
(continued)
Wash Cycle Selections
Note: Not all cycles available on all models.
Pots & Pans
Rinse/Hold
For pots, pans, casseroles and
dinnerware with dried-on or
baked-on soils:
For rinsing dishes that will be
washed later:
• DO NOT USE detergent.
• Turn dial to RINSE/HOLD.
• Turn dial to POTS & PANS.
• Select desired OPTIONS.
Plate Warmer
For warming dishes and serving
plates before serving hot foods.
Normal Wash
For regularly soiled dishes and
silverware:
• Load clean plates and dishes
• Turn dial to NORMAL WASH.
to be warmed.
• Turn dial to PLATE WARMER.
• Select HOT DRY option.
• Select desired OPTIONS.
Light Wash
For lightly soiled or pre-rinsed
dishes and silverware:
• Turn dial to LIGHT WASH.
• Select desired OPTIONS.
Cycle Chart - MDB100, MDB110
Cycles
Water
(approx.)
Time
(approx.)
Washes/Rinses
Normal
Wash
6.9 gal.
109 min.*
2 washes 4 rinses
5.7 imp. gal.
26.1 liters
5.8 gal.
Light
103 min.*
2 washes 3 rinses
Wash
4.8 imp. gal.
22.0 liters
(MDB110)
* Includes dry time.
5
Operating Instructions
(continued)
Cycle Chart - MDB125, F71C12
Cycles
Water
(approx.)
Time
(approx.)
Washes/Rinses
Pots &
Pans
8.4 gal.
103 min.*
95 min.*
89 min.*
2 washes 5 rinses
7.0 imp. gal.
31.8 liters
Normal
Wash
7.2 gal.
2 washes 4 rinses
6.0 imp. gal.
27.3 liters
6.0 gal.
Light
Wash
1 wash
4 rinses
1 rinse
5.0 imp. gal.
22.7 liters
1.2 gal.
1.0 imp. gal.
4.5 liters
Rinse/
Hold
10 min.
14 min.
Plate
Warmer
* Includes dry time.
Energy Options
Hot Dry Option
With either option, you may see
water vapor coming from vent
during drying portion of cycle.
HOT DRY option provides faster
drying since the heating element
is on during the drying portion of
the cycle.
The drying option may be
changed at any time during the
cycle and affects only the drying
period.
Cool Dry Option
COOL DRY option saves
electricity since the heating
element is off during the drying
portion of the cycle. To speed
drying process, open the door
slightly after the cycle is
complete.
Some water droplets may
remain on door and tub and in
areas where dishes touch
silverware basket and rack.
6
Preparing and Loading Dishes
Dish Preparation
Scrape away large pieces of
food, bones, pits, toothpicks, etc.
The continuous filtered wash
system will remove remaining
food particles. Burned-on foods
should be loosened before
loading. Empty liquids from
glasses and cups.
• Load racks so that large items
do not prevent the detergent
dispenser from opening.
• Check manufacturer’s
recommendations before
washing items in question.
• If the dishwasher drains into a
food disposer, be sure
disposer is completely
empty before starting
dishwasher.
Foods such as mustard,
mayonnaise, vinegar, lemon
juice and tomato based products
may cause discoloration of
stainless steel and plastics if
allowed to sit for a long period of
time. Unless the dishwasher
is to be operated at once, it is
best to rinse off these food soils.
Loading the Top Rack
The top rack is designed for
cups, glasses, small plates,
saucers and bowls.
Load glasses in top rack.
Damage may occur if placed in
bottom rack.
Load plastic items in top rack
only. Melting may occur if placed
in bottom rack.
Load items with open ends
facing down for better cleaning
and draining.
Damage may occur if delicate
items touch each other during
dishwasher operation.
Long-handled knives and
utensils can be placed in top
rack.
7
Preparing and Loading Dishes
(continued)
Loading the Bottom
Rack
Place plates and platters so that
they do not touch.
Place bowls, casseroles and
sauce pans with the soiled
surface facing down or toward
the center. Tilt slightly for better
drainage.
Be sure pan handles do not
protrude through the bottom of
the rack and block the spray arm
Do not block tower protector
rotation.
Loading the Silverware
Basket
Mix spoons, forks and knives to
prevent nesting. Mixing items
gives better cleaning and drying.
For safety, load sharp knives and
forks with handles up.
Be sure nothing protrudes
through bottom of basket or rack
to block the spray arm.
Do not mix silver and stainless to
avoid damaging the silver finish.
Note: Silverware basket may
vary by model.
8
Dishwasher Dispenser & Detergents
•
Use only fresh automatic
Filling the Detergent
dishwashing detergent. Other
Dispenser
types will cause oversudsing.
Some models have a detergent
•
•
Add detergent just before
starting cycle.
dispenser with one covered and
one uncovered cup. Detergent in
the uncovered cup falls into the
dishwasher when the door is
closed. The covered cup opens
automatically to release
Store detergent in a cool, dry
location. Moist or caked
detergent will not dissolve
properly.
detergent. See illustration below.
The uncovered cup on models
with only one cup will be
labeled “Detergent” and
detergent should be added
before starting selected cycle.
Fill both cups
for Pots & Pans
and Normal.
Fill to second
line when
using
standard
dishwashing
detergent.
Fill covered
cup only for
Light Wash.
Fill to first line
when using ultra
or concentrated
detergent.
Cover
9
Dishwasher Dispenser & Detergents
(continued)
How much Detergent to
use
The amount of detergent to use
depends on the water hardness.
Water hardness is measured in
grains per gallon. Using too little
detergent can result in poor
cleaning and hard water filming
or spotting. Using too much
detergent in soft water can
cause permanent etching on
glassware.
Your local water company, water
softener company or county
extension agent can tell you the
water hardness in your area.
More detergent may be needed
if the phosphorus content is
8.7% or less. The phosphorus
content is shown on the
detergent label.
Detergent Chart
Water Hardness
Amount to Use
Soft (0-3 grains)
2 Teaspoons
Medium (4-8 grains)
Hard (9+ grains*)
5 Teaspoons
10 Teaspoons
(fill level with top)
* 12 grains and higher is extremely hard water.
Detergent alone may not be enough. A water
softener is recommended to improve water quality
and dishwashing performance.
10
Dishwasher Dispenser & Detergents
(continued)
Rinse Aid
A rinse aid greatly improves
drying and reduces water
spots and filming. Water
“sheets” off dishes rather than
forming water droplets that cling
and leave spots.
To add liquid rinse aid, turn
dispenser cap 1/ turn
counterclockwis4e and lift out.
Pour in rinse aid until liquid
touches the indicated fill level.
Replace cap.
Rinse aids come in solid or liquid
form. If your dishwasher does
not have a rinse aid dispenser,
the solid rinse aid should be
fastened to the front corner of
the upper rack. When material
dissolves and the container is
empty, it is time to replace.
Do not overfill since this can
cause oversudsing. Wipe up any
spills with a damp cloth.
The dispenser holds enough for
35 to 140 washes, depending on
setting.
A dispenser for liquid rinse aid is
located next to the detergent cup
and automatically releases a
measured amount of rinse aid
during the final rinse. If spotting
and poor drying are problems,
increase the amount of rinse aid
dispensed by rotating the dial to
a higher number. The dial is
located under the dispenser cap.
The indicator will be dark when
full and will show clear when it is
time to refill.
Dispenser
Opening
Indicator
Dispenser
Cap
Adjustable
Setting
11
Factors Affecting Performance
Water Temperature
Hot water is needed for best
dishwashing and drying results.
Water entering dishwasher
should be at least 120°F (49°C)
to give satisfactory results.
To check water temperature
entering dishwasher:
• Turn on hot water faucet
nearest dishwasher for
several minutes to clear cool
water from pipes.
• Hold a candy or meat
thermometer in stream of
water to check the
temperature.
• If temperature is below 120°F
(49°C), have a qualified
person raise the hot water
heater thermostat setting.
Important: Before starting a
cycle, run hot water to clear
cool water from pipe.
Water Pressure
The hot water line to dishwasher
must provide water pressure
between 20 and 120 psi. Low
water pressure may occur when
laundry or showers are in
operation. Wait until water use is
reduced before starting
dishwasher.
12
Care and Cleaning
Burn Hazard
Allow heating element to cool
before cleaning the interior.
Failure to do so can result in
burns.
Outside—Occasionally wipe
Overfill Protector—keeps
dishwasher from overfilling and
is located in the left front corner
of the tub.
with a mild nonabrasive
detergent and water. Rinse and
dry.
•
Clean occasionally with
household cleaner
Inside—The inside of the
containing vinegar or bleach
to dissolve any buildup.
Overfill Protector should
move up and down freely
about one inch. If it does not
move, lift and clean
dishwasher, including the filter,
is self-cleaning with normal use.
If needed, clean around the tub
gasket area with a damp cloth.
•
underneath.
Heating element
Care of Drain Air Gap
If a drain air gap was installed
for your built-in dishwasher,
check to make sure it is clean so
the dishwasher will drain
Filter
Spray arm/tower
assembly
properly. A drain air gap is
usually mounted on countertop
and can be inspected by
removing the cover. This is not
part of your dishwasher and is
not covered by warranty.
Note: Hard water may cause
lime deposit buildup on the
interior of the dishwasher. For
cleaning instructions see
‘‘Removing Spots and Film’’
section.
13
Care and Cleaning
(continued)
Property Damage Hazard
Freezing temperatures may cause water lines to
rupture.Be sure all supply lines to and circulating
lines within dishwasher are protected.
Failure to do so could result in property damage.
Winterizing
A dishwasher left in an unheated place should be protected from
freezing. Have a qualified person do the following:
To Disconnect Service:
To Restore Service:
1. Turn off electrical power to
the dishwasher at the supply
source by removing fuses or
tripping circuit breaker.
1. Reconnect the water, drain,
and electrical power supply.
2. Turn on water and electrical
power supply.
2. Shut off water supply.
3. Fill detergent cup(s) and run
dishwasher through a
NORMAL cycle.
4. Check connections to make
sure they do not leak.
3. Place a pan under the inlet
valve. Disconnect water line
from inlet valve and drain
into pan.
4. Disconnect drain line from
pump and drain water into
pan.
Note: See Installations
Instructions for more details.
14
Changing Color Panels
Cut Hazard
Metal door panels are sharp and
should be handled with care.
Wear gloves to protect hands.
Failure to do so can result in
injury.
Some models come with reversible door panel inserts.
To change the color panel:
1. Remove snap-on bottom trim by pulling forward. Support color
panel(s) at bottom while removing trim. Slide color panel(s)
downward 1/2”.
Color
Panel(s)
Bottom
Trim
2. Grasp top and bottom of panels and bow slightly until they are clear
of trim. DO NOT REMOVE SPACER.
Spacer
Side
Trim
Color Panel(s)
15
Changing Color Panels
(continued)
3. Arrange panel(s) so desired color is facing out. Place one side of
panel under side trim and bow slightly until other side fits under
opposite trim. Slide panel(s) up to fit under control panel.
Control Panel
Color Panel(s)
4. Replace bottom trim by fitting slot over bottom edge of door and
secure by pressing from one side to the other.
Bottom
Trim
Bottom Edge
of Door
Customized Wood Panels
Some models can be customized with 1/4” wood panels. Refer to your
installation instructions for more information.
16
Solutions to Common Dishwashing
Problems
Before calling for service, review this list. It may save you both
time and expense. This list includes common experiences that
are not the result of defective workmanship or material in your
dishwasher.
• Increase the amount of rinse
Food Soils Left on
Dishes
• Choose another cycle for
longer washing time.
• Check rack loading section for
proper loading—avoid nesting
items.
aid, if available on your model.
(See Rinse Aid).
• Check the incoming water
temperature. Be sure it is at
least 120°F (49°C).
• Check for proper loading—
avoid nesting items.
• Home water pressure may be
too low—should be 20 to 120
pounds per square inch (psi).
• Check incoming water
temperature. It should be at
least 120°F (49°C). (See
Factors Affecting
• Plastic items may need to be
towel dried.
• Cups with a concave bottom
will collect water.
Glassware/Flatware
Spotted or Cloudy
• Check water hardness. For
extremely hard water, it may
be necessary to install a
water softener. (See
Performance.)
• Check water hardness. For
extremely hard water, it may
be necessary to install a
water softener. (See
Detergent Chart.)
Detergent Chart.)
• Water temperature may be
low. Avoid extremely low or
high temperatures. (See
Factors Affecting
• Use fresh detergent.
• Check to make sure tower in
lower rack is not blocked.
• Make sure items are not
blocking the spray arm,
preventing it from rotating.
• Check to see if the liquid rinse
aid dispenser needs refilling
or if the solid rinse aid needs
replacing.
Performance.)
• Avoid overloading and
improper loading. (See
Preparing and Loading
Dishes.)
• Use fresh detergent. Old
detergent is ineffective.
• Check to see that proper
amount of detergent is being
used. Also, check phosphate
level. (See Detergent
Dispenser.)
Dishes not Dry
• Select Hot Dry option.
• Make sure the liquid rinse aid
dispenser is filled. Check
container to see if it is time to
replace solid rinse aid.
• Home water pressure may be
too low—it should be 20 to
120 pounds per square inch
(psi).
17
Solutions to Common Dishwashing
Problems
(continued)
• Mixing stainless steel and
silver utensils in silverware
basket can cause pitting of
the stainless steel blades.
Avoid mixing stainless steel
and silver.
Dishware Chipped
• Load with care and do not
overload. (See Preparing and
Loading dishes.)
• Place delicate items in top
rack.
• Place glasses securely against
pins and not over pins.
• Load items so they are secure
and don’t jar loose when
moving racks in and out. Move
racks in and out slowly.
• Make sure tall glasses and
stemware will clear top of tub
when rack is pushed in.
• Fine antique china and crystal
should be hand-washed.
Etching
• Using too much detergent in
soft or softened water causes
this film that cannot be
removed.
• Adjust the amount of detergent
based on the water hardness.
(Check Detergent Chart.)
• Lower the water temperature.
• Use the Cool Dry option.
Detergent Left in Cups
Dishware Stained or
Discolored
• Tea and coffee can stain cups.
Remove the stains by hand
washing in a solution of 1/2 cup
(120 ml) bleach and one quart
(1 L) of warm water. Rinse
thoroughly.
• Detergent may be old. Discard
and use fresh detergent.
• Be sure water action can
reach the dispenser.
• Check to see if cycle has been
completed.
• Make sure items do not
prevent the detergent
• Iron deposits in water can
cause a yellow or brown film.
A special filter installed in the
water supply line will correct
this problem. (See Removing
Spots and Film.)
dispenser from opening.
• Aluminum utensils can leave
gray/black marks when they
rub against other items. Load
properly.
• Certain high acid foods can
cause discoloration of
stainless steel and plastics if
allowed to sit for a long period.
Rinse by hand if not operating
dishwasher at once.
18
Solutions to Common Dishwashing
Problems
(continued)
Dishwasher Leaks
Dishwasher Won’t Run
• Check to see if circuit breaker
is tripped or if a fuse is blown.
• Make sure water supply is
turned on.
• Check to see if cycle is set
correctly. (See Operating
Instructions.)
• Use only fresh detergent
designed for automatic
dishwashers. Measure
detergent carefully. Try a
different brand.
• Spilled rinse aid can cause
foam and lead to overflowing.
Wipe up any spills with damp
cloth.
• Make sure door is closed and
latched.
• Check to see that dishwasher
is level. (See Installation
Instructions.)
Dishwasher Does Not
Drain Properly
• If unit is hooked up to a food
waste disposer, make sure
the disposer is empty.
• Check to see if the knockout
plug has been removed from
inside the food waste disposer
inlet.
Normal Sounds You Will
Hear
• Normal sounds include water
fill, water circulation and
motor sounds.
• Check to see if drain hose is
Water in Bottom of Tub
• Water left in bottom of tub after
cycle is complete is not
kinked.
• Make sure cycle is complete,
not in a pause.
normal. If water remains in the
bottom of the tub, dishwasher
may not be draining properly.
(See Dishwasher Does Not
Drain Properly.)
Dishwasher Won’t Fill
• Is water supply turned on?
• Does overfill protector move
up and down freely? (See
Overfill Protector section.)
Normal water fill covers filter
area.
Vapor at Vent
• Water vapor escapes from the
vent when the dishwasher is
operating. This is normal.
19
Solutions to Common Dishwashing
Problems
(continued)
Dishwasher Has an
Odor
Removing Spots and
Film
Hard water can cause lime
deposit buildup on the interior of
the dishwasher. Dishes and
glasses may also get spots and
film for a number of reasons.
(See Glassware/Flatware
Spotted or Cloudy section.) To
remove buildup, spots and film,
clean using the following
• Soiled dishes left in
dishwasher too long can
create an odor. Use Rinse/
Hold cycle or rinse by hand.
• There will be a “new” smell
when first installed. This is
normal.
• Check to see if unit is draining
properly. (See Dishwasher
Does Not Drain Properly.)
instructions:
1. Load clean dishes and
glasses in normal manner.
Do not load any metal
Stains on Tub Interior
• Washing large amounts of
dishware with tomato based
soil can cause a pink/orange
appearance. This will not
utensils or silverware.
2. Do not add detergent.
3. Turn dial to NORMAL WASH.
Close and latch door to start.
4. Allow dishwasher to run for
40 minutes to reach the main
wash portion of cycle.
5. Unlatch and open door and
pour 2 cups of white vinegar
into the bottom of
affect performance and will
gradually fade over time. Pre-
rinsing or using the Rinse/
Hold cycle will reduce the
chance of staining. Using Cool
Dry option will lessen staining.
dishwasher.
6. Close and latch door and
allow the cycle to finish.
Note: If these conditions persist,
a home water softener should be
considered.
20
Consumer Services
Keep your bill of sale, delivery slip or some other appropriate payment
record. The date on the bill establishes the warranty period should service
be required.
Dishwasher Warranty
Warranty
(continued)
Warrantor: Frigidaire Company, a
division of White Consolidated
Industries, Inc.
Not Covered
1. Service calls where the
problem is not the fault of the
appliance. Examples—applicable to
various appliance types but not
limited to the following things:
Covered
Full One Year Parts and Labor
Warranty
For one year from date of purchase,
Frigidaire Company will repair or
replace any part of the appliance that
proves to be defective in materials or
workmanship.
a. Service calls to remove shipping
devices; to level your appliance;
to correct leaks at water inlet
hose connections; to correct
improper placement of drain hose
in drain; to turn gas supply line
on; to correct an improper
Limited One Year Parts and Labor
Warranty
(State of Alaska only)
All terms stated above apply except all
of the technician’s travel costs to the
home for service and any costs for
pickup and delivery of the appliance
(required because of service), are
excluded.
exhaust system or to connect
your appliance to your exhaust
duct; to advise you on proper
setting of controls or on proper
use of your appliance; to correct
installation of appliance; to
replace owner-accessible light
bulbs or fluorescent tubes.
b. Service calls where the problem
is due to house wiring or
Extended Limited 2nd Year Warranty
For two years from date of purchase,
Frigidaire Company will provide a
replacement (or functional equivalent),
for any part in the water distribution
system that proves to be defective in
materials or workmanship. Associated
inlet and drain plumbing parts are not
included. The consumer must pay for
all labor and service charges, and the
cost to ship the part(s) to the nearest
authorized servicer.
improper voltage supply; a blown
fuse or tripped circuit breaker; a
slow or backed-up drain; a weak
or spongy floor; insects, rodents
or pests; frozen water lines in
your appliance or house;
improper power cord connections
to appliance; blockage or
restrictions in house exhaust duct
or hood; appliance installed
outside, exposed to elements.
Extended Limited 2nd-10th Year
Warranty
2. Repairs when product is used in
dwellings with multiusers (such as in
community-type complexes).
For ten years from date of purchase,
Frigidaire Company will provide a
replacement tub or door liner if the
original tub or door liner fails to contain
water because of a manufacturing
defect. Door seals are not included.
The consumer must pay for all labor
and service charges, and the cost to
ship the replacement part(s) to the
nearest authorized servicer.
3. Damage to your appliance caused
by misuse, fire, flood, acts of God,
or by using parts and/or service not
approved by Frigidaire Company
Consumer Services or an authorized
Frigidaire Servicer.
21
Consumer Services
Warranty
Not Covered
4. Consequential or incidental
damages such as property
damage and incidental
(continued)
Warranty
Conditions
(continued)
• have product properly
installed in line with all
local, plumbing, electrical and/or
gas codes. Appliance must be
properly connected and grounded
to a power supply of sufficient
voltage.
• have the product moved out of
place and back into place (if
moving the appliance is essential
for service). If product cannot be
moved by the consumer, the
servicer will not be liable for
damages to the floor.
expenses resulting from any
breach of this written or any
implied warranty. Note: Some
states do not allow the exclusion or
limitation of incidental or
consequential damages, so this
limitation or exclusion may not apply
to you.
5. Expenses to make appliance
accessible for servicing (for
instance, removal of cabinets,
cabinet doors or molding).
6. Service calls to products with serial
plates that have been removed,
altered, and that cannot be read
well.
To Obtain Parts and
Service
1. Contact Frigidaire Company
Consumer Services or an
Conditions
authorized Frigidaire Servicer.
1. This warranty gives you
specific legal rights; you may have
other rights, which vary from state-
to-state. We authorize no one to
change or make additions to this
warranty.
2. If there is a question on where to
obtain service, call or write our
Consumer Assistance Center at:
2. Service and installation must be
provided by Frigidaire Company
Consumer Services, or by an
authorized Frigidaire Company
Servicer. Use only genuine
Frigidaire Company Consumer
Parts.
800•444•4944
Frigidaire Home Products
P.O. Box 212378
Augusta, GA 30917
3. Product features/specifications are
subject to change without notice.
Versión en español
Si desea obtener una copia en español
de este Manual del Usuario, sírvase
escribir a la dirección que se incluye a
continuación. Solicite la P/N 154340602.
4. In the event a product cannot be
repaired, a usage charge will be
incurred.
5. The consumer must:
Spanish Use & Care Manual
Frigidaire Home Products
P.O. Box 212378
• properly use and maintain
appliance.
• read and follow all warning/safety
instructions in the instruction
manuals and on the product.
• read and follow all instructions in
the Use & Care Manual, the
Installation Instructions and on the
product.
Augusta, GA 30917
Visit Frigidaire Company's Web Site
22
Consumer Services
Dishwasher Warranty — Canada
WARRANTOR:
For service under this warranty,
contact your local dealer/retailer,
authorizedFRIGIDAIREPARTSAND
SERVICE depot, or:
Frigidaire Home Products
7075 Ordan Drive
Mississauga, Ontario
L5T 1K6
FRIGIDAIREPARTSANDSERVICE
7075 Ordan Drive
Mississauga, Ontario
L5T 1K6
Tel.: (905) 565-9200
Fax: (905) 565-0937
This dishwasher is a branded
product of Frigidaire Home
Products.
WARRANTY PERIOD:
WARRANTORWILLTHROUGHITS
AUTHORIZED SERVICE DEPOT:
Forthefirstyearafterpurchasebythe Pay all costs to repair or replace
original consumer/owner: any defective parts.
For the second and third year after Pay all costs (excluding labour) to
purchase by the original consumer/ repair or replace defective heating
owner:
elementandwaterdistributionsystem
including the circulation pump/motor,
drain pump/motor, lower spray arm
system and filtration system.
For the second through tenth year Pay all costs (excluding labour) to
after purchase by the original repair or replace a defective inner
consumer/owner.
door liner arising out of the
manufacturing process.
Fortheusefullifeofthedishwasherby Pay all costs (excluding labour) to
the original consumer/owner.
repair or replace a defective
polypropylene tub arising out of the
manufacturing process.
23
Consumer Services
Dishwasher Warranty — Canada
WARRANTY APPLIES TO:
a) Products purchased and installed in Canada for personal single family
household use.
b) Defects resulting or arising out of the manufacturing process.
c) Products bearing legible manufacturer's model and serial numbers.
d) Replacement parts only for the remainder of the original warranty.
WARRANTY DOES NOT APPLY TO:
a) Transportation damage.
b) Supply and replacement of porcelain, fuses, glass and light bulbs.
c) Parts and service supplied or obtained from other than FRIGIDAIRE
PARTSANDSERVICEorFRIGIDAIREPARTSANDSERVICEauthorized
depots.
d) Damage or failure as the result of abuse, improper or commercial use.
CONSUMER/OWNER RESPONSIBILITY:
a) To provide proof of the original date of purchase by means of a bill of sale
or payment record verifying purchase date.
b) To pay all costs to make the appliance readily accessible for service.
c) To ensure proper power supply and connection of the appliance to same.
d) Proper installation, control setting and care of finish.
This warranty is in addition to any statutory warranties contained in any
applicable legislation. The terms and conditions of this warranty are not
intended to exclude or limit your rights under those statutes. The warrantor
however reserves the right to charge transportation and travelling costs for
distances in excess of 48 kilometres (30 miles) from the nearest FRIGIDAIRE
PARTS AND SERVICE authorized service depot.
This warranty plus the statutory warranties mentioned are the only warranties
given to the consumer/owner for this product.
24
|