INSTRUCTION MANUAL
SRT-7168
Real Time Video Recorder
English
Français
Español
Enregistreur vidéo en temps réel
Videograbador en tiempo real
Please read this manual and accompanying “IMPORTANT SAFETY INSTRUCTIONS” sheet carefully before connecting your
VCR and operating it for the first time.
Be sure to read carefully and follow all the PRECAUTIONS on page 1.
Keep the manual in a safe place for future reference.
FEATURES
CONTENTS
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
ACCESSORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
œ JOG/SHUTTLE operation
œ Can also be controlled through an RS-232C or RS-485
connection
œ Clog detection
œ High-speed Fast Forward/Rewind
œ Field recording/playback
LOCATIONS OF CONTROLS AND
INDICATORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
œ 8, 24, 40, 64, 96, 128, 160 and 224-hour mode
CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
recording (T-160)
TYPES OF ON-SCREEN DISPLAYS AND
œ 6, 18, 30, 48, 72, 96, 120 and 168-hour mode recording
DISPLAY SEQUENCE . . . . . . . . . . . . . . . . . . . . . . 7
(T-120)
SETTING THE LANGUAGE AND CLOCK . . . . . . . . . . . 9
CHANGING THE ON-SCREEN DISPLAY . . . . . . . . . . 10
VIDEO CASSETTE TAPES . . . . . . . . . . . . . . . . . . . . . 11
NORMAL RECORDING . . . . . . . . . . . . . . . . . . . . . . . . 13
AUTOREPEAT RECORDING. . . . . . . . . . . . . . . . . . . . 16
ALARM RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . 17
PROGRAM TIMER RECORDING . . . . . . . . . . . . . . . . 20
œ In 8, 24, 40-hour modes audio recording is available
(T-160)
œ In 6, 18, 30-hour modes audio recording is available
(T-120)
œ Autorepeat recording
œ Series recording function
œ Alarm recording function
œ On-screen mode setting
œ Integrated time date generator
œ Day/Time search function
œ Alarm scan/search function
œ Forward/Reverse frame advance function
œ 30-day memory backup
RECORDING USING AN
EXTERNAL TIMER INPUT . . . . . . . . . . . . . . . . . . 24
SERIES RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . 25
NORMAL PLAYBACK. . . . . . . . . . . . . . . . . . . . . . . . . . 27
SPECIAL PLAYBACK. . . . . . . . . . . . . . . . . . . . . . . . . . 28
TAPE COUNTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
SETTING THE SECURITY LOCK . . . . . . . . . . . . . . . . 30
SETTING THE BUZZER. . . . . . . . . . . . . . . . . . . . . . . . 31
CLOCK ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . 31
SETTING THE CASSETTE EJECT MODE . . . . . . . . . 32
œ Security lock
œ Recording check function
œ Automatic head cleaning function
ACCESSORY
Power cord
SETTING THE RS-232C OR RS-485
DATA TRANSFER SPEED . . . . . . . . . . . . . . . . . . 33
CHECKING POWER FAILURE,
FAILURE DUE TO CONDENSATION AND
USAGE DURATION . . . . . . . . . . . . . . . . . . . . . . . 34
OUTPUT TERMINALS . . . . . . . . . . . . . . . . . . . . . . . . . 35
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . 40
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Download from Www.Somanuals.co2m. All Manuals Search And Download.
English
LOCATIONS OF CONTROLS AND INDICATORS
Front Panel
12 3 4 5 6
7
8 9 F
G H
T
O
MENU
REC/PLAY
PLAY
(REC CHECK)
]
SHIFT
«
«
l
SPEED
j
l
j
»
COUNTER
TRACKING
– V.STILL +
STILL
PAUSE
RESET MEMORY
TIMER
REPEAT
REC
OFF
ON SCREEN
OFF
ON
TAPE
SELECT
ON
SEARCH
STOP
ALARM
SHARPNESS
POWER
REPEAT
SPEED
DURATION
8H
20S
PROG.
CC
T-160
24H
NC
T-120
a
i
REC
EJECT
SOFT SHARP
MENU RESET
ALL RESET
XW VU TSRQ I P
O
N
M
L
K J
I
1 TIMER button
2 COUNTER RESET button
M Digital display panel
N POWER indicator
3 SHIFT ] or « (display position down or right) button
4 COUNTER MEMORY button
O REPEAT (autorepeat recording) indicator
P REC (record) button
5 REC/PLAY SPEED l or j (decrease or increase
Q REPEAT REC (autorepeat recording) switch
R ALARM DURATION (alarm recording time) switch
S ALARM SPEED (alarm recording speed) switch
T ON SCREEN switch
recording/playback speed mode) button
6 TRACKING/V. STILL – or + button
7 Cassette loading slot
8 PLAY (REC CHECK) button
9 STILL/PAUSE button
F JOG dial
U ALL RESET button
V TAPE SELECT switch
W MENU RESET button
G SHUTTLE ring
X SHARPNESS control
H MENU button
NOTE:
I Front door
œ Buttons 3 and 5 are also used for menu control.
J SEARCH button
K STOP button
L EJECT button
English
Download from Www.Somanuals.co3m. All Manuals Search And Download.
LOCATIONS OF CONTROLS AND INDICATORS
Digital Display
5 Mode display
œ Recording/playback
speed mode
œ Alarm search mode
œ Alarm scan mode
œ Dew display
1 Operation Indicators
5, 6 Mode display
œ They display the actual operation mode.
œ Day/Time search
mode
Operation Mode
Indicator
Record (REC)
Record pause (REC PAUSE)
Playback (PLAY)
6 Counter display
œ Time display
Still image (STILL)
Fast forward (FF)
Rewind (REW)
œ Linear time counter
Forward picture search
Reverse picture search
display
Reverse playback
7 OFF indicator
Field shift forward
Comes on when the tape end has been reached after
a recording, except during autorepeat recording mode.
Field shift backward
œ Clog detection indicator
8 Counter memory indicator
Flashes when the recording quality deteriorates
due to dirty VCR heads.
Comes on when the counter memory function is
engaged.
9 Timer Recording indicator
2 Cassette indicator
Comes on when in timer recording stand-by mode, or
during a timer recording.
Comes on when a cassette is loaded.
3 Alarm indicator
F Security lock indicator
Flashes when an alarm is
being recorded:
Comes on when the security lock is engaged.
G External input indicator
E
Comes on after the alarm
has been recorded:
Comes on when recording using the EXT TIMER IN
input terminal.
4 Power failure indicator
Comes on after a power failure.
LOCATIONS OF CONTROLS AND INDICATORS
Back Panel
1
2
3
H
EXT
WARNING TAPE
SW
ALARM
OUT
TIMER IN COM
OUT END OUT OUT
COM
IN
IN
A
RS485
B
CLOCK SET
SERIES OUT/ SERIES
TIMER
OUT
EJECT
OUT
OUT
IN
NON REC OUT
IN
COM
ADDRESS
ON
TERMINATE
ON
485
232
PUSH
OPEN
OFF
OFF
AUDIO
VIDEO
IN
OUT
IN
OUT
REMOTE MIC IN
AC IN ~
RS232C
X
W
V U T S R Q
Pin locations
Pin locations
4 5 6 7 8 9 F G
(female) on the VCR
(male) on the VCR
EXT
WARNING TAPE
SW
ALARM
OUT
TIMER IN COM
OUT END OUT OUT
COM
IN
1
5
NOTE:
This terminal board
CLOCK SET
SERIES OUT/ SERIES
TIMER
OUT
EJECT
OUT
OUT
IN
NON REC OUT
IN
COM
IN
may be damaged by
5kg-cm or more torque
and using φ6mm-tip or
more size screwdrivers.
1
6
6
9
NOTE:
Do not connect to
phone line.
P O N M L K J I
1 RS485 A connector (RJ11 type)
2 RS485 B connector (RJ11 type)
3 DIP switches
K TIMER OUT (timer recording output) terminal
L COM (common) terminal
M SERIES IN (series recording trigger input) terminal
œ Used when controlling the VCR through the RS485
N SERIES OUT/NON REC OUT (series recording
or the RS232C connectors.
trigger output/non recording output) terminal
4 EXT TIMER IN (external timer input) terminal
5 COM (common) terminal
O CLOCK SET IN (external clock set trigger input)
terminal
P CLOCK SET OUT (external clock set trigger output)
6 WARNING OUT (warning output) terminal
7 TAPE END OUT (tape end output) terminal
8 SW OUT (switch output) terminal
9 COM (common) terminal
terminal
Q VIDEO OUT (video output) jack
R VIDEO IN (video input) jack
S AUDIO OUT (audio output) jack
T AUDIO IN (audio input) jack
U MIC IN (microphone input) jack
V REMOTE (remote control input) jack
W RS232C connector (D-sub 9-pin type)
X AC power input
F ALARM OUT (alarm output) terminal
G ALARM IN (alarm input) terminal
H Battery compartment
I EJECT IN (eject trigger input) terminal
J EJECT OUT (eject trigger output) terminal
English
Download from Www.Somanuals.co5m. All Manuals Search And Download.
CONNECTIONS
Connect the video camera and monitor TV as shown in the figure below.
NOTE: Before making the connections, make sure the devices are disconnected from the power outlet.
Monitor TV (sold separately)
Video camera
(sold separately)
To
VIDEO IN
jack
From an external
audio source
EXT
WARNING TAPE
SW
ALARM
OUT
TIMER IN COM
OUT END OUT OUT
CO
IN
IN
A
RS485
B
CLOCK SET
SERIES OUT/ SERIES
TIM
OU
EJECT
OUT
OUT
IN
NON REC OUT
IN
COM
ADDRESS
ON
TERMINATE
ON
485
PUSH
OPEN
OFF
OFF
232
AUDIO
IN OUT
VIDEO
IN
OUT
REMOTE MIC IN
AC IN ~
RS232C
Power cord
To
VIDEO
OUT
jack
Coaxial cable
To remote control
(sold separately)
To outlet
(sold separately)
NOTES:
Power Cord Installation
œ For more details, please refer to the manuals
accompanying all other devices. If the connections are
not made properly, it may cause a fire or damage the
equipment.
1 Plug the supplied power cord firmly into the AC power
input AC IN ~ socket.
2 Insert the plug of this power cord into a outlet.
œ You can use a VA-RMN01 Remote Control Unit (sold
separately) to control remotely the VCR.
About the memory reset
œ The grounded power cord (3 pin plug) must be
If the VCR location is changed or to cancel previous
settings, please reset the memory as described below.
connected to a grounded power outlet.
œ If there is no video signal when the power is turned on,
All the settings as the time and date will be reset, and the
security lock will be cancelled.
“NO VIDEO” will be displayed on-screen.
To reset the memory, press the ALL RESET button.
Download from Www.Somanuals.co6m. All Manuals Search And Download.
English
TYPES OF ON-SCREEN DISPLAYS AND
DISPLAY SEQUENCE
Reference pages are shown in square brackets.
Monitor TV screen (normal screen)
10-15-99 FRI 000
15:20:00
8
Set the ON SCREEN
switch to the “ON” position
Press the
MENU button
[20-24]
[9, 25, 36, 37]
SET UP 1 menu
TIMER SET menu
<SET UP 1>
D
<TIMER SET>
To set various VCR functions
D
To set timer recordings
Press the
MENU button
Press the
MENU button
Press the SEARCH button
Press the SEARCH button
[10, 31]
[22]
SET UP 2 menu
HOLIDAY SET menu
<SET UP 2>
D
<HOLIDAY SET>
D
To set various VCR functions
To set the holidays
Press the
MENU button
Press the
MENU button
Press the SEARCH button
Press the SEARCH button
[18]
[17, 27, 31, 12, 16, 35, 15, 25, 36, 33]
SET UP 3 menu
ALARM TIME menu
<SET UP 3>
<ALARM TIME>
DTo set various VCR functions
D
To display the number, date and
time of the alarm recordings
Press the
MENU button
Press the
MENU button
Press the SEARCH button
Press the SEARCH button
POWER FAILURE/DEW/
USED TIME menu
[36, 12, 14, 32]
[34]
D
SET UP 4 menu
<SET UP 4>
To display the number and
duration of power failures
DTo set various VCR function
<POWER FAILURE>
D
To display the number and duration
of failures due to condensation
<DEW>
D
To display the time used
<USED TIME>
Press the
MENU button
Press the
MENU button
Press the SEARCH button
Press the SEARCH button
English
Download from Www.Somanuals.co7m. All Manuals Search And Download.
TYPES OF ON-SCREEN DISPLAYS AND DISPLAY SEQUENCE
NOTES:
Using the JOG dial and SHUTTLE ring
œ When a menu is displayed, recording will not be
JOG dial
possible.
œ Put the tip of your index finger into the depression then
œ Press the SEARCH or MENU button, the setting
turn the dial in any direction.
procedure is now completed.
œ When a menu is displayed, turn the dial clockwise and
the cursor will move to the right (or down). Turn the dial
counterclockwise and the cursor will move to the left
(or up).
œ During recording or playback the menus cannot be
displayed.
œ To reset the settings of a menu to their original values,
select the desired menu then press the MENU RESET
button. The (USED TIME) menu data cannot be reset.
SHUTTLE ring
œ To enter the settings use the JOG dial or SHUTTLE
œ When a menu is displayed, turn the ring of 10° or more
clockwise and the selected data setting will change or
the selected setting value will increase. Turn the ring of
10° or more counterclockwise and the selected data
setting will change or the selected setting value will
decrease.
ring.
œ If held for 1 second or more the changes will be made
sequentially.
Download from Www.Somanuals.co8m. All Manuals Search And Download.
English
SETTING THE LANGUAGE AND CLOCK
5 Turn the SHUTTLE ring to set the month the daylight
Language Setting
saving time adjustment is made, then turn the JOG
English, French or Spanish can be selected by the user.
dial clockwise.
1 Turn the power on to all devices used.
01, 02,.....11, 12 (for January,
February......November, December)
2 Press the MENU button to display the (SET UP 1)
menu.
6 Turn the SHUTTLE ring to set the time the daylight
@@@@@@@<SET@UP@1>
saving time adjustment is made.
öDAYLIGHT@SET@@@@@NO@USE
@@@@@@@@WEEK@MONTH@TIME
@ON@@@1ST-SUN@@04@02:00
@OFF@@LST-SUN@@10@02:00
öOUTPUT@@@@@@@@SERIES
öCLOCK@SET
@01-01-00@SAT@@00:00:00
öREMOTE@@@@@@@@EJECT
öLANGUAGE-LANGUE-IDIOMA
@@@ENGLISH
7 Turn the JOG dial clockwise, until “LST” is flashing.
8 Following the same procedure as above (steps 4 to
6), set when the time is changed back from daylight
saving time to standard time.
3 Turn the JOG dial, until “ENGLISH” is flashing.
9 Turn the JOG dial clockwise, until the “CLOCK SET”
setting is flashing.
4 Turn the SHUTTLE ring to select the language of
your choice.
F Turn the SHUTTLE ring to set the month (ex: 10),
then turn the JOG dial clockwise.
5 Press the SEARCH button to save the setting.
ø The day of week is set automatically.
G Turn the SHUTTLE ring to set the day (ex: 15), then
turn the JOG dial clockwise.
Clock setting
Example: To set the clock to October 15, 1999 at 3:20
H Turn the SHUTTLE ring to set the year (ex: 99 for
1999), then turn the JOG dial clockwise.
PM (15:20).
1 Press the MENU button to display the (SET UP 1)
ø The last 2 digits only are displayed.
menu.
I Turn the SHUTTLE ring to set the hours (ex: 15 for 3
PM), then turn the JOG dial clockwise.
2 Turn the SHUTTLE ring, to set the auto daylight
saving time/standard time adjustment.
J Turn the SHUTTLE ring to set the minutes (ex: 20),
then turn the JOG dial clockwise.
NO USE. . . . No daylight saving time/standard
time adjustment is made.
@@@@@@@<SET@UP@1>
USE . . . . . . . The auto daylight saving time/
standard time adjustment is made.
öDAYLIGHT@SET@@@@@USE
@@@@@@@@WEEK@MONTH@TIME
@ON@@@1ST-SUN@@04@02:00
@OFF@@LST-SUN@@10@02:00
öOUTPUT@@@@@@@@SERIES
öCLOCK@SET
3 Turn the JOG dial clockwise, until “1ST” is flashing.
@10-15-99@FRI@@15:20:00
öREMOTE@@@@@@@@EJECT
öLANGUAGE-LANGUE-IDIOMA
@@@ENGLISH
4 Set the day the daylight saving time adjustment is
made.
œ Turn the SHUTTLE ring to set the week, then turn
the JOG dial clockwise.
K For accurate clock setting, turn the SHUTTLE ring
counterclockwise timed with a time broadcast, or
other accurate time signal, this will start the seconds
counting from 00.
1ST, 2ND, 3RD, 4TH or LST (first, second, third,
fourth or last)
L Press SEARCH button.
ø The setting procedure is now completed.
NOTES:
œ Turn the SHUTTLE ring to set the day of week,
then turn the JOG dial clockwise.
SUN, MON, TUE, ...... SAT (Sunday, Monday,
Tuesday....Saturday)
œ Clock display is only 24 hours.
œ In STOP mode, press and hold the STOP button then
press the TRACKING/V.STILL– button to reset the
minutes and seconds to 00 (to the closest hour). For
example, between 13:30:00 and 14:29:59 the clock is
reset to 14:00:00.
English
Download from Www.Somanuals.co9m. All Manuals Search And Download.
CHANGING THE ON-SCREEN DISPLAY
Selecting the On-screen Display
Changing the Date/Time Display Position
You can select to display or not the date, time, the
number of alarm recordings and tape speed.
1 Turn the power on to all input devices to the VCR.
2 Set the ON SCREEN switch to the “ON” position.
ø The date and time are displayed.
1 Turn the power on to all devices used.
2 Press the MENU button until the (SET UP 2) menu is
10-15-99@FRI@000
15:20:00@@@8
displayed.
@@@@@@@<SET@UP@2>
öDISPLAY
@@@DATE@@@@@@@@@@@Y
@@@TIME@@@@@@@@@@@Y
@@@ALARM@COUNT@@@@Y
@@@SPEED@@@@@@@@@@Y
öBUZZER
@@@ALARM@IN@@@@@@@Y
@@@TAPE@END@@@@@@@Y
@@@KEY@IN@@@@@@@@@N
@@@WARNING@@@@@@@@Y
3 Press the SHIFT « (or ]) button.
ø The display will move towards the right (or the
3 Turn the JOG dial clockwise, until the desired item for
bottom).
which the display function will be set is flashing.
NOTES:
4 Turn the SHUTTLE ring to set “Y” for the functions
described below.
œ If the SHIFT « (or ]) button is kept pressed for 1
second or more the display will move at a faster speed.
DATE . . . . . . . . . . . . The date is displayed
TIME . . . . . . . . . . . . The time is displayed
œ The display position cannot be changed while
recording.
ALARM COUNT. . . . The number of alarm
recordings is displayed
SPEED. . . . . . . . . . . The recording/playback
speed mode is displayed
5 Press the SEARCH button to save the settings.
ø The setting procedure is now completed.
NOTE:
œ If the ON SCREEN switch is set to the “ON” position,
the items for which “Y” is set are recorded. The items
for which “N” was set at step 4 above are not
recorded.
Download from Www.Somanuals.co1m0. All Manuals Search And Download.
English
VIDEO CASSETTE TAPES
Use only video cassette tapes bearing the w logo. This
Loading
VCR was primarily designed for use with T-120 or T-160
cassette tapes, it is recommended to use T-120 or T-160
standard grade VHS video cassette tapes for optimal
performance.
1 Place the cassette, label side up, in the loading slot.
Gently push the center of the cassette until it is
loaded automatically.
Handling Cassette Tapes
The cassette tapes should always be stored vertically, in
their cases, away from high temperatures, magnetic
fields, direct sunlight, dirt, dust and locations subject to
mold formation.
Do not tamper with the cassette mechanism and never
touch the tape with your fingers.
ø The time display will switch to the reset counter
“0:00:00” display.
Protect the cassette tapes from shocks or strong
vibrations.
ø After the cassette tape is loaded, a mechanism
will operate for about 5 seconds to check that
the tape has been threaded correctly and the
cassette indicator “o” will blink during that
period.
To Protect your Recordings
After having recorded a tape, if you wish to keep the
recording, use a flathead screwdriver to break off the
erasure-prevention tab on the cassette.
ø When the cassette is loaded, if the tape has
been threaded correctly, the cassette indicator
“o” will light on the digital display.
To record again on a tape without erasure-prevention tab,
cover the hole with adhesive tape.
NOTE:
œ If you try to record on a cassette without
erasure-prevention tab, the VCR will eject the cassette.
Unloading
1 In stop mode, press the EJECT button.
ø The cassette is automatically ejected.
Erasure-prevention tab
NOTES:
œ Do not insert any object in the cassette loading slot, as
Precautions concerning the video
cassette tapes
œ Do not use tapes that are damaged, tapes that have
been cut and repaired or tapes that have been altered
in any way.
that may cause injury and damages to the VCR.
œ If your hand gets stuck in the cassette loading slot,
unplug the power cord and consult the dealer where
the unit was bought. Do not forcibly pull the hand out
as that may cause severe injuries.
œ Some rewinders may entangle the tape, and therefore
their use is not recommended.
œ When tapes are recorded over and over again, the
recording quality will deteriorate. Refer to “Concerning
the Number of Times Tapes can be Rerecorded on” on
page 14, and replace the tape with a new tape as
required.
English
Download from Www.Somanuals.co1m1. All Manuals Search And Download.
VIDEO CASSETTE TAPES
Correct tape thread check function
Setting the Action to Take When a
Cassette is Loaded
In the (SET UP 3) menu, you can set the mode the VCR
will go into when a cassette is loaded.
If the correct tape thread check function is on, after the
cassette tape is loaded, a mechanism will operate for
about 5 seconds to check that the tape has been
threaded (loaded) correctly and the cassette indicator “o”
will blink during that period. If the tape is not loaded
properly, the cassette will be ejected.
1 Press the MENU button until the (SET UP 3) menu is
displayed.
@@@@@@@<SET@UP@3>
NOTES:
öALARM@MODE@@@@@@@Y1
öALARM@DURATION@@@20S
öVERTICAL@SYNC@@@@Y
öEXT@TIME@ADJ.@@@@01:00
öTAPE@IN@MODE@@@@@STOP
öTAPE@END@MODE@@@@REW
öTAPE@END@OUT@@@@@-3M
öCLOG@DETECT.@@@@@Y
öSERIES@REC@IN@@@@N
öRS-232C@@@@@@@@@@19200
œ This function checks to make sure that the cassette
has been correctly loaded. It is recommended to use
this function to make sure the recordings are
conducted reliably.
œ If during the tape thread check operation, the REC,
PLAY or STOP button is pressed or if the SHUTTLE
ring is turned, the command will only be executed after
the tape thread has been checked. Only the EJECT
button will operate while the tape thread is being
checked.
2 Turn the JOG dial, until the “TAPE IN MODE” setting
is flashing.
3 Turn the SHUTTLE ring, to set the desired mode.
STOP . . . . . . Stays in stop mode
REC . . . . . . . Goes into recording mode
œ If in the (SET UP 3) menu “TAPE IN MODE” is set to
“REC”, the recording indicator “m” will light during the
while the tape thread is checked. However, recording
will only start after the tape thread check is completed.
To cancel recording, press the STOP button.
4 Press the SEARCH button to save the setting.
1 Press the MENU button until the (SET UP 4) menu is
displayed.
@@@@@@@@<SET@UP@4>
öSW@OUT
@@FIELD@@@@@@@@@01
@@TIMING@@@@@@@@FIELD
@@8H@@@@@@@@@@@@Y
öTHREAD@CHECK@@@Y
öVIDEO@LOSS@@@@@N
öREC@SPEED@@@@@@N
öEJECT@SET
@@EJECT@MODE@@@@EJECT1
@@OPERATION@@@@@SLAVE
2 Turn the JOG dial, until the “THREAD CHECK”
setting is flashing.
3 Turn the SHUTTLE ring, to set the desired mode.
Y . . . . . . . . . The correct tape thread check
function is on
N . . . . . . . . . The correct tape thread check
function is off
4 Press the SEARCH button to save the setting.
Download from Www.Somanuals.co1m2. All Manuals Search And Download.
English
NORMAL RECORDING
Normal Recording
[Recording Speed Mode]
(When the TAPE SELECT switch is set to “T-160”)
Before starting
Recording
Maximum
recording
Recording
interval
speed mode
Audio recording Tape motion
œ Turn the power on to all devices used.
(hour mode) duration (hours) (second)
8
24
40
8
24
40
1/60
3/60
5/60
œ Load a cassette tape with erasure-prevention tab.
Possible
Continuous
Intermittent
NOTE:
64
72
9/60
œ If in the (SET UP 3) menu, TAPE IN MODE is set
to “REC”, recording will start after the tape thread
has been checked.
96
104
136
168
232
13/60
17/60
21/60
29/60
128
160
224
Not possible
œ Set the ON SCREEN switch to the “ON” position.
(When the TAPE SELECT switch is set to “T-120”)
œ Set the TAPE SELECT switch to the “T-120” or
Recording
Maximum
recording
Recording
interval
“T-160” position.
speed mode
Audio recording Tape motion
(hour mode) duration (hours) (second)
NOTE:
6
18
30
6
18
30
1/60
3/60
5/60
Possible
Continuous
Intermittent
œ Set the TAPE SELECT switch according to the
duration of the tape used.
48
54
9/60
72
78
13/60
17/60
21/60
29/60
96
120
168
102
126
174
Not possible
1 Press the REC/PLAY SPEED l (or j) button to set
the recording speed mode.
NOTE:
ø The recording speed mode is displayed
on-screen and on the digital display.
œ The tape speed display will vary according to the TAPE
SELECT switch setting. In this manual, all the
examples and displays used are for when the TAPE
SELECT switch is set to “T-160”. If set to “T-120”,
please refer to the table above for the corresponding
durations and displays.
2 Press the REC button.
ø The record indicator “m” light.
ø Recording starts.
ø When the end of the tape is reached, “OFF” will
For example, if the recording speed mode is “8”, then
the corresponding recording speed when set to “T-120”
be displayed.
NOTES:
will be “6”. And, the counter reading of 7 57 00 will
H
M
S
œ If in the (SET UP 2) menu, in the BUZZER section
TAPE END is set to “Y”, the buzzer will be heard
as long as “OFF” is displayed on the digital display.
be 5 57 00 when set to “T-120”.
H
M
S
Record Pause
Recording can be interrupted temporarily.
œ To cancel the “OFF” display, press the STOP,
EJECT or PLAY button or turn the SHUTTLE ring.
1 Press the STILL/PAUSE button during recording.
ø The Pause/Still indicator “N” blinks.
œ If recording stops due to a problem with the tape or
other reason, the unit will try once to resume
recording. If the tape still does not advance, the
VCR will go into stop mode.
NOTES:
œ The image appears on-screen but it is not recorded.
3 To stop recording, press the STOP button.
œ If a recording pause continues for 5 minutes or
more, the VCR will go into stop mode to avoid
damaging the tape.
NOTES:
œ A tape recording made on this VCR may not play back
with the same degree of clarity on a time lapse from
another manufacturer.
2 To resume recording, press the REC button, or press
the STILL/PAUSE button again.
œ If you press on the REC button and the loaded
cassette has no erasure-prevention tab, the VCR will
eject the cassette.
English
Download from Www.Somanuals.co1m3. All Manuals Search And Download.
NORMAL RECORDING
Concerning the Number of Times Tapes
can be Rerecorded on
Changes to the Recording Speed Mode
During Recording
Depending on the recording speed mode, the tape must
be replaced after a certain number of recording times.
It is possible to permit or prevent changing the recording
speed mode during recording.
Refer to the table below for the maximum number of times
a tape can be recorded on.
1 Press the MENU button until the (SET UP 4) menu is
displayed.
@@@@@@@<SET@UP@4>
öSW@OUT
Recording speed mode
(hour mode)
Maximum number of
recording times
(with a standard grade
tape)
@@FIELD@@@@@@@@@01
@@TIMING@@@@@@@@FIELD
@@8H@@@@@@@@@@@@Y
öTHREAD@CHECK@@@Y
öVIDEO@LOSS@@@@@N
öREC@SPEED@@@@@@N
öEJECT@SET
@@EJECT@MODE@@@@EJECT1
@@OPERATION@@@@@SLAVE
6, 8
100
50
50
25
10
6
18, 24
2 Turn the JOG dial, until the “REC SPEED” setting is
30, 40
flashing.
48, 64
3 Turn the SHUTTLE ring, to set the desired mode.
72, 96
Y. . . . . . . . . . Recording speed mode can be
changed
96, 128
120, 160
168, 224
5
N. . . . . . . . . . Recording speed mode can not be
changed
3
4 Press the SEARCH button to save the setting.
NOTES:
œ The maximum number of recording times will vary
depending on the location and kind of tape used. Verify
the recording quality and replace the tape when the
quality starts to deteriorate.
Action to Take when the Video Signal
Deteriorates
If there is no video signal during recording, fast forward,
rewind modes, when in stop mode or when a tape is not
loaded the menus are not displayed, “VIDEO LOSS” can
be displayed on-screen and a signal (0 V) can be output
at the ALARM OUT terminal. If in the (SET UP 2) menu,
in the BUZZER section WARNING is set to “Y”, the
buzzer will be heard. To stop the buzzer, press the STOP
button.
The maximum number of recording times indicated
above are based on test tapes (T-120 and T-160) used
by the company.
œ If using longer tapes (i.e. T-180) the tape travel will not
be as stable and that may cause problems.
1 Press the MENU button until the (SET UP 4) menu is
displayed.
2 Turn the JOG dial, until the “VIDEO LOSS” setting is
flashing.
3 Turn the SHUTTLE ring, to set the desired mode.
N. . . . . . . . . . The video loss warning is not
active.
Y. . . . . . . . . . The video loss warning is active.
4 Press the SEARCH button to save the setting.
Download from Www.Somanuals.co1m4. All Manuals Search And Download.
English
NORMAL RECORDING
Recording Check
The image being recorded can be checked.
1 During recording, press the PLAY (REC CHECK)
button.
ø The tape will be rewound and then played back.
The VCR will then return to the previous
recording mode.
NOTE:
œ During recording check operations, recording is
suspended momentarily.
Clog Detection
This VCR is equipped with a clog detection function.
The recording quality is monitored automatically. When
the heads are dirty and the recording quality deteriorates,
the output at the WARNING OUT terminal becomes 0V
(Low), the “m” indicator flashes on the digital display, and
the buzzer sounds.
If in the (SET UP 3) menu, CLOG DETECT. is set to “N”,
the recording quality is not monitored.
NOTES:
œ To cancel the “m” indicator display and reset the
WARNING OUT terminal output, press the STOP
button.
œ Clog detection is not possible if recording in 8-hour
mode.
English
Download from Www.Somanuals.co1m5. All Manuals Search And Download.
AUTOREPEAT RECORDING
Autorepeat Recording
Setting the Mode at the End of the Tape
The same tape can be recorded over many times.
In the (SET UP 3) menu, you can set the mode of the
VCR mode when the tape reaches the end during
recording.
œ Follow the Before starting steps, under “NORMAL
RECORDING”.
1 Press the MENU button until the (SET UP 3) menu is
1 Set the REPEAT REC switch to the “ON” position.
ø The REPEAT indicator will light.
displayed.
@@@@@@@<SET@UP@3>
öALARM@MODE@@@@@@@Y1
öALARM@DURATION@@@20S
öVERTICAL@SYNC@@@@Y
öEXT@TIME@ADJ.@@@@01:00
öTAPE@IN@MODE@@@@@STOP
öTAPE@END@MODE@@@@REW
öTAPE@END@OUT@@@@@-3M
öCLOG@DETECT.@@@@@Y
öSERIES@REC@IN@@@@N
öRS-232C@@@@@@@@@@19200
2 Press the MENU button until the (SET UP 3) menu is
displayed.
ø The “ALARM MODE” setting is flashing.
@@@@@@@<SET@UP@3>
öALARM@MODE@@@@@@@Y1
öALARM@DURATION@@@20S
öVERTICAL@SYNC@@@@Y
öEXT@TIME@ADJ.@@@@01:00
öTAPE@IN@MODE@@@@@STOP
öTAPE@END@MODE@@@@R1
öTAPE@END@OUT@@@@@-3M
öCLOG@DETECT.@@@@@Y
öSERIES@REC@IN@@@@N
öRS-232C@@@@@@@@@@19200
2 Turn the JOG dial, until the “TAPE END MODE”
setting is flashing.
3 Turn the SHUTTLE ring, to set the desired mode.
œ Setting when the REPEAT REC switch is set to the
3 Turn the JOG dial, until the “TAPE END MODE”
“OFF” position.
setting is flashing.
REW. . . . . . . Rewinds the tape to the beginning,
then goes to stop mode
4 Turn the SHUTTLE ring to set to “R 1” or “R 2”. (See
“Setting the Mode at the End of the Tape”)
STOP . . . . . . Goes to stop mode
5 Press the SEARCH button to save the setting.
ø The setting procedure is now completed.
EJECT . . . . . The cassette is ejected
œ Setting when the REPEAT REC switch is set to the
“ON” position.
6 Press the REC/PLAY SPEED l (or j) button to set
the recording speed mode.
R1. . . . . . . . . Autorepeat recording mode is
automatically canceled if there was
an alarm trigger
7 Press the REC button.
ø Recording will start. When the tape end is
reached, the VCR will rewind it to the beginning,
and recording will resume.
R2. . . . . . . . . Autorepeat recording mode is
active even if there was an alarm
trigger
ø When the end of the tape is reached, a buzzer
will be heard (if in the (SETUP 2) menu, in the
BUZZER section TAPE END is set to “Y”) and
“OFF” will be displayed until the rewinding
operation starts.
4 Press the SEARCH button to save the setting.
NOTES:
œ If during autorepeat recording there is an alarm trigger,
“AL” is displayed on the digital display and alarm
recording will take place. (Please refer to page 17,
“ALARM RECORDING”.)
œ If the “TAPE END MODE” setting is R 1, the REPEAT
indicator will go off if there is an alarm trigger. The
recording will continue to the end of the tape then it will
be rewound to the beginning and stop. “OFF” will be
displayed on the digital display. To turn off the buzzer
(if in the (SETUP 2) menu, in the BUZZER section
TAPE END is set to “Y”) and the “OFF” display, press
the STOP, EJECT or PLAY button, or turn the
SHUTTLE ring.
œ If “AL” is displayed on the digital display and the “TAPE
END MODE” setting is R1, autorepeat recording is not
possible.
Download from Www.Somanuals.co1m6. All Manuals Search And Download.
English
ALARM RECORDING
By connecting the ALARM IN terminal to a door switch,
an interphone, etc., a recording can be done only when
necessary.
If the ALARM DURATION switch is set to the “PROG.”
position, please continue with steps 5 and 6.
5 Turn the JOG dial, until the “ALARM DURATION”
setting is flashing.
Alarm Recording Setting
Alarm recording is performed when there is an input
(trigger) at the ALARM IN terminal, “AL” is displayed on
the digital display.
6 Turn the SHUTTLE ring, to select the desired alarm
recording duration (20S, 40S, 1M, 2M, 3M, 4M, 5M,
or CC).
20S-5M. . Recording only for the displayed duration
œ Make all necessary connections.
CC . . . . . Recording as long as the alarm signal is
being input (minimum 5 seconds)
œ Follow the Before starting steps, under “NORMAL
RECORDING”.
7 Press the SEARCH button to save the settings.
ø The setting procedure is now completed.
1 Set the ALARM SPEED switch to the desired
recording speed.
8H . . . . . 8-hour mode recording
NOTES:
24H . . . . 24-hour mode recording
NC . . . . . Recording at the speed already set
œ During alarm recording all buttons are disabled.
œ If “OFF” is displayed on the digital display, alarm
recording is not possible in order to prevent the
recorded tape to be recorded over.
2 Set the ALARM DURATION switch to the desired
recording duration.
To cancel the “OFF” display, press the STOP, EJECT
or PLAY button or turn the SHUTTLE ring.
20S. . . . . 20-second recording
PROG. . . Recording for the duration set for the
“ALARM DURATION” item in the (SET
UP 3) menu.
œ If an alarm trigger is received while alarm recording is
in progress, recording duration for the second alarm
will be calculated from that point. The alarm counter
will register the alarm, but it will not be found during an
alarm scan and alarm search.
CC . . . . . Recording as long as the alarm signal is
being input (minimum 5 seconds)
œ If there is a power failure during alarm recording, and
the power is restored within the recording set duration,
alarm recording will continue.
3 Press the MENU button until the (SET UP 3) menu is
displayed.
@@@@@@@<SET@UP@3>
öALARM@MODE@@@@@@@Y1
öALARM@DURATION@@@20S
öVERTICAL@SYNC@@@@Y
öEXT@TIME@ADJ.@@@@01:00
öTAPE@IN@MODE@@@@@STOP
öTAPE@END@MODE@@@@REW
öTAPE@END@OUT@@@@@-3M
öCLOG@DETECT.@@@@@Y
öSERIES@REC@IN@@@@N
öRS-232C@@@@@@@@@@19200
œ If the alarm recording duration is short, the alarms may
not be found during an alarm scan or an alarm search.
If the alarms are going to be reviewed using alarm
scan or alarm search, then in 8-hour mode, 20-second
or more recording duration should be used.
œ To do alarm recording during series recording, set
“ALARM MODE” to “Y1” or “Y3”. Alarm recording will
be conducted only if the VCR is recording.
4 Turn the SHUTTLE ring to set the desired alarm
mode.
Y1. . . . . . Alarm recording is done when there is an
alarm trigger.
Y2. . . . . . Alarm recording is done only when there
is an alarm trigger during programmed
timer recording.
Y3. . . . . . Alarm recording is done only if there is
an alarm trigger and the VCR is not in
programmed timer recording mode.
Y4. . . . . . Alarm recording is done only when there
is an alarm trigger during programmed
timer recording duration. Timer recording
is not possible.
N . . . . . . Alarm recording is not performed even if
there is an alarm trigger.
English
Download from Www.Somanuals.co1m7. All Manuals Search And Download.
ALARM RECORDING
Alarm Recording Counter Display
Checking the Alarm Recordings Time
œ During alarm recording, “AL” will be flashing on the
1 Press the MENU button until the (ALARM TIME)
digital display.
menu is displayed.
œ If the ON SCREEN switch is set to the “ON” position,
ø The number of alarm recordings, and the 8 most
the number of alarms will flash on the monitor screen.
recent alarm recording times are displayed.
œ The maximum display number of alarm recordings is
“999”, at the next alarm recording the counter will
indicate “000”.
@@@@@@<ALARM@TIME>
@@@@008@12-25@19:00
@@@@@@@@11-25@23:00
@@@@@@@@11-25@15:00
@@@@@@@@10-25@08:00
@@@@@@@@10-25@06:00
@@@@@@@@09-25@20:00
@@@@@@@@09-25@16:35
@@@@@@@@09-25@10:52
œ When the (ALARM TIME) menu is displayed, press the
MENU RESET button to reset the alarm counter to
“000” (all the data of the (ALARM TIME) menu is reset).
NOTE:
Connections to the ALARM IN/OUT
Terminals
œ The data for the previous alarm recordings is
erased.
œ Alarm input signal
2 Press the SEARCH button, the normal screen is
Connect a make-contact (no voltage) switch between
the ALARM IN and COM terminals.
displayed.
NOTE:
œ Alarm output signal
Normally DC 5V are output between the ALARM OUT
and the COM terminals. When an alarm input (trigger)
is received and the unit is recording, the output falls to
0V. Once the alarm recording is over, the output
returns to DC 5V.
œ If the MENU RESET button is pressed while the
(ALARM TIME) menu is displayed, the displayed data
is erased. “AL” will be erased from the digital display.
Download from Www.Somanuals.co1m8. All Manuals Search And Download.
English
ALARM RECORDING
Alarm Search
Alarm Scan
To go to the beginning of a desired alarm recording.
To look for an alarm recording by viewing the first 5
seconds of each alarm recording.
1 Press the SEARCH button during stop mode.
ø “AL SEARCH 01” will be displayed on screen.
1 Press the SEARCH button twice during stop mode.
ø “AL SCAN” will be displayed on screen.
2 Press the REC/PLAY SPEED l (or j) button to set
the desired alarm number (1 to 99), then turn the
SHUTTLE ring clockwise (or counterclockwise).
2 Turn the SHUTTLE ring clockwise (or
counterclockwise).
ø The desired alarm is searched and a still image
of the beginning of the alarm recording will
appear on-screen.
ø The unit will advance (or rewind) the tape at high
speed and playback the first 5 seconds of every
alarm recording.
ø To cancel the alarm scan mode, press the STOP
button.
NOTE:
œ The alarm number is relative to the actual tape
3 While the desired recording is being played back,
press the PLAY button.
position. (Please refer to the illustration below.)
Playback
ø Playback will start, alarm scan mode is cancelled.
1
1
2
Alarm number 2
Alarm trigger input point
Rewind direction
Fast-forward direction
Actual position
3 Press the PLAY button.
ø Playback will start.
English
Download from Www.Somanuals.co1m9. All Manuals Search And Download.
PROGRAM TIMER RECORDING
There are two program timer recording methods, daily
recording or recording on certain days of the week.
7 Turn the SHUTTLE ring to set the recording stop
minutes (ex: 00), then turn the JOG dial clockwise.
ø The “SPD” (recording speed) position will start
Example 1: To record on every Saturday from 9:00
AM to 5:00 PM (17:00), in 24-hour
flashing.
mode (recording speed).
NOTE:
œ Follow the Before starting steps, under “NORMAL
œ If the set stop time is earlier than or the same time
as the set start time, the VCR will consider the stop
time to be the following day, and “T” will be
displayed next to the recording stop time.
RECORDING”.
1 Press the MENU button until the (TIMER SET) menu
is displayed.
8 Turn the SHUTTLE ring to select the recording speed
mode (ex: 24), then turn the JOG dial clockwise.
œ “SUN” (Sunday) will be flashing.
@@@@@@<TIMER@SET>
WEEK@START@@STOP@@@SPD
SUN@@--:--@@--:--@@---@N
MON@@--:--@@--:--@@---@N
TUE@@--:--@@--:--@@---@N
WED@@--:--@@--:--@@---@N
THU@@--:--@@--:--@@---@N
FRI@@--:--@@--:--@@---@N
SAT@@--:--@@--:--@@---@N
DLY@@--:--@@--:--@@---@N
EXT@@ööööö@@ööööö@@---@N
ø “N” will start flashing.
9 Turn the SHUTTLE ring to select the desired program
timer recording mode.
Y. . . . . . . . . . recording will take place
N. . . . . . . . . . recording will not take place
2 Turn the JOG dial, until “SAT” (Saturday) is flashing.
@@@@@@<TIMER@SET>
WEEK@START@@STOP@@@SPD
SUN@@--:--@@--:--@@---@N
MON@@--:--@@--:--@@---@N
TUE@@--:--@@--:--@@---@N
WED@@--:--@@--:--@@---@N
THU@@--:--@@--:--@@---@N
FRI@@--:--@@--:--@@---@N
SAT@@09:00@@17:00@@@24@Y
DLY@@--:--@@--:--@@---@N
EXT@@ööööö@@ööööö@@---@N
3 Turn the JOG dial clockwise.
ø The recording start hour position starts flashing.
4 Turn the SHUTTLE ring to set the recording start hour
(ex: 09), then turn the JOG dial clockwise.
ø The recording start minutes position starts
ø Repeat steps 2 to 9 to program timer
flashing.
recordings for other days of the week.
5 Turn the SHUTTLE ring to set the recording start
minutes (ex: 00), then turn the JOG dial clockwise.
F Press the SEARCH button to save the settings.
G Press the TIMER button.
ø The recording stop hour position starts flashing.
ø The timer recording indicator “n” will light on the
digital display, the VCR is now in timer recording
stand-by mode.
6 Turn the SHUTTLE ring to set the recording stop hour
(ex: 17), then turn the JOG dial clockwise.
ø The recording stop minutes position starts
NOTES:
flashing.
œ To modify, cancel or stop timer recording, press
the TIMER button to cancel the timer recording
mode.
œ To record everyday at the same time, at step 2
select the “DLY” line.
Download from Www.Somanuals.co2m0. All Manuals Search And Download.
English
PROGRAM TIMER RECORDING
A timer recording of more than 24 hours can only be set
on the 7th (SAT) and 8th (DLY) lines of the (TIMER SET)
menu.
8 Turn the SHUTTLE ring, to set the desired stop day
of the week (ex: MON), then turn the JOG dial
clockwise.
ø The recording stop hour position starts flashing.
Example 2: To record every week from Saturday at
9:00 PM (21:00) to Monday at 7:00 AM, in
40-hour mode (recording speed).
9 Turn the SHUTTLE ring to set the recording stop hour
(ex: 07), then turn the JOG dial clockwise.
ø The recording stop minutes position starts
flashing.
œ Follow the Before starting steps, under “NORMAL
RECORDING”.
F Turn the SHUTTLE ring to set the recording stop
minutes (ex: 00), then turn the JOG dial clockwise.
1 Press the MENU button until the (TIMER SET) menu
is displayed.
ø The “SPD” (recording speed) position will start
flashing.
œ “SUN” (Sunday) will be flashing.
2 Turn the JOG dial, until “SAT” is flashing.
G Turn the SHUTTLE ring to select the recording speed
mode (ex: 40), then turn the JOG dial clockwise.
3 Turn the SHUTTLE ring to set the desired start day of
the week (ex: SAT), then turn the JOG dial clockwise.
ø “N” will start flashing.
ø The recording start hour position starts flashing.
H Turn the SHUTTLE ring to select “Y”.
@@@@@@<TIMER@SET>
4 Turn the SHUTTLE ring to set the recording start hour
(ex: 21), then turn the JOG dial clockwise.
WEEK@START@@STOP@@@SPD
SUN@@--:--@@--:--@@---@N
MON@@--:--@@--:--@@---@N
TUE@@--:--@@--:--@@---@N
WED@@--:--@@--:--@@---@N
THU@@--:--@@--:--@@---@N
FRI@@--:--@@--:--@@---@N
SAT@@21:00@@öö:öö@@ööö@ö
MON@@öö:öö@@07:00@@@40@Y
EXT@@ööööö@@ööööö@@---@N
ø The recording start minutes position starts
flashing.
5 Turn the SHUTTLE ring to set the recording start
minutes (ex: 00), then turn the JOG dial clockwise.
I Follow steps F and G under “PROGRAM TIMER
ø The recording stop hour position starts flashing.
RECORDING” on page 20.
6 Turn the SHUTTLE ring to set “öö” for the recording
stop hour.
ø The rest of the line settings will change to
“öö:öö ööö ö”, the day of the next line will
change to the next day and the start time will
change to “öö:öö” automatically.
7 Turn the JOG dial clockwise.
ø The day of the week of the 8th line is flashing.
English
Download from Www.Somanuals.co2m1. All Manuals Search And Download.
PROGRAM TIMER RECORDING
Setting the Holidays
Changing a Program Timer Recording
By setting the holidays, timer recording will be conducted
on those days, as set for Sundays.
1 Press the MENU button until the (TIMER SET) menu
is displayed.
1 Press the MENU button until the (HOLIDAY SET)
2 Turn the JOG dial, until the setting to correct is
menu is displayed.
flashing.
@@@@@<HOLIDAY@SET>
3 Turn the SHUTTLE ring, to correct the setting.
4 Press the SEARCH button to save the settings.
5 Press the TIMER button.
@@1@@-----@@@11@@-----
@@2@@-----@@@12@@-----
@@3@@-----@@@13@@-----
@@4@@-----@@@14@@-----
@@5@@-----@@@15@@-----
@@6@@-----@@@16@@-----
@@7@@-----@@@17@@-----
@@8@@-----@@@18@@-----
@@9@@-----@@@19@@-----
@10@@-----@@@20@@-----
To Cancel a Program Timer Recording
2 Turn the SHUTTLE ring to set the month of the
holiday, then turn the JOG dial clockwise.
1 Press the MENU button until the (TIMER SET) menu
is displayed.
3 Turn the SHUTTLE ring to set the day of the holiday.
2 Turn the JOG dial, until the “Y” corresponding to the
4 Turn the JOG dial, until the next line to set starts
timer recording to cancel is flashing.
flashing.
3 Turn the SHUTTLE ring, to select “N”.
4 Press the SEARCH button to save the settings.
5 Press the TIMER button.
ø Repeat steps 2 to 4 to set up to 20 holidays.
5 Press the SEARCH button to save the settings.
ø The setting procedure is now completed.
NOTE:
To Cancel all Program Timer Recordings
œ If setting holidays, be sure that a timer recording is set
1 Press the MENU button until the (TIMER SET) menu
for Sunday. If not, this function will not operate.
is displayed.
œ If a timer recording for Sundays is entered, the holidays
timer recording will not function if the program timer
recording mode is set to “N”.
2 Press the MENU RESET button.
ø All programmed timer recordings are erased.
œ To erase a setting, follow the same procedure as
above, but at step 2 and 3, enter “--” instead of a
setting.
3 Press the SEARCH button, the normal screen is
displayed.
Download from Www.Somanuals.co2m2. All Manuals Search And Download.
English
PROGRAM TIMER RECORDING
NOTES:
œ During timer recording or timer recording stand-by, all
the buttons on the VCR, except the TIMER button and
the buttons to set/cancel the security lock (see page
30), are disabled.
œ If the power fails, the recording will be interrupted.
When the power is restored, the recording will resume
if the stop time has not yet been reached, and “P” will
be displayed on the digital display. The VCR internal
battery is completely recharged after the VCR has
been connected to a live outlet for 48 hours, and it will
maintain all the VCR settings memory for up to 30 days.
œ Set the timer recordings so that the recording times do
not overlap. If they do, the one with the earliest
recording start time will have priority. (See chart below.)
7:00PM
8:00PM
9:00PM
10:00PM
Program 1
Program 2
Program 3
These portions will
not be recorded
œ To set two or more timer recordings for a same day of
the week, turn the JOG dial, until the day of the week
for the second recording is flashing, then turn the
SHUTTLE ring, to set the desired day of the week.
œ If no timer recording is set or a cassette without
erasure-prevention tab is loaded, when the TIMER
button is pressed the timer recording indicator “n” will
start flashing and a buzzer will be heard.
œ If “OFF” is displayed on the digital display, timer
recording is not possible in order to prevent the
recorded tape to be recorded over.
English
Download from Www.Somanuals.co2m3. All Manuals Search And Download.
RECORDING USING AN EXTERNAL TIMER
INPUT
Recording can be controlled by an external start/stop
signal input at the EXT TIMER IN terminal.
5 Follow steps F and G under “PROGRAM TIMER
RECORDING on page 20”.
ø When an external signal is input, “E” will light on
Example 3: To record using the signal input at the
EXT TIMER IN terminal, in 24-hour
mode.
the digital display and recording will take place.
NOTES:
œ Other timer recordings using the standard procedure
œ Follow the Before starting steps, under “NORMAL
can also be programmed.
RECORDING”.
œ The external input signal must be input at the EXT
TIMER IN terminal.
NOTE:
œ External timer input recording can only be set on the
9th line (EXT) of the (TIMER SET) menu.
1 Press the MENU button until the (TIMER SET) menu
is displayed.
2 Turn the JOG dial, until “EXT” (External) setting is
flashing.
ø The “SPD” (recording speed) position will start
flashing.
3 Turn the SHUTTLE ring to select the recording speed
mode (ex: 24), then turn the JOG dial clockwise.
ø “N” will start flashing.
4 Turn the SHUTTLE ring to select “Y”.
@@@@@@<TIMER@SET>
WEEK@START@@STOP@@@SPD
SUN@@--:--@@--:--@@---@N
MON@@--:--@@--:--@@---@N
TUE@@--:--@@--:--@@---@N
WED@@--:--@@--:--@@---@N
THU@@--:--@@--:--@@---@N
FRI@@--:--@@--:--@@---@N
SAT@@--:--@@--:--@@---@N
DLY@@--:--@@--:--@@---@N
EXT@@ööööö@@ööööö@@@24@Y
Download from Www.Somanuals.co2m4. All Manuals Search And Download.
English
SERIES RECORDING
Using 2 VCRs or more, the series recording function lets
you switch recording from one unit to the next (only with
VCRs of the same model as this one).
The SERIES OUT signal will be presence either at the
point when the counter reading is 7 57 00 or when
VCR No. 1 reaches the end of the tape, whichever is first.
The signal will stop 70 seconds after the tape end point of
VCR No. 1.
H
M
S
Series Recording Setup
œ Connect 2 VCRs or more as illustrated below.
When this signal is received by VCR No. 2, it will start
recording. During the period when the SERIES OUT
signal is being received by VCR No. 2, if the STOP button
of VCR No. 2 is accidentally pressed, VCR No. 2 will go
into the stop mode for an instant and then return to the
record mode.
œ Set the TAPE SELECT switch according to the
duration of the tape used.
1 Press the REC/PLAY SPEED l (or j) button to set
the recording speed mode.
To prevent this form occuring, the security lock of VCR
No. 2 should be set to the on condition.
2 Set the following items as indicated.
If TAPE END MODE is set to “REW”, when the end of the
tape is reached “OFF” is displayed, the tape is rewound
then stops.
Item
VCR No.1
VCR No.2
and on
Cassette tape
Loaded
Stop
Loaded
Stop
Operation mode
REPEAT REC switch
Counter memory
NOTES:
OFF
OFF
œ If the counter reading on VCR No.1 is 7 57 00 or
H
M
S
Canceled
Canceled
more, when the REC button is pressed (step 3), the
recording will start on VCR No.2.
“OUTPUT” (in (SET UP
1) menu)
SERIES
Y (YES)
SERIES
Y (YES)
œ If in the (SET UP 3) menu “SERIES REC IN” is set to
“N” and in the (SET UP 1) menu “OUTPUT” is set to
“NON REC”, series recording will not be possible.
“SERIES REC IN” (in
(SET UP 3) menu)
Timer recording
Security lock
OFF (not set) OFF (not set)
Canceled Set
œ The counter must start from the beginning of tape, or
the series recording out will not function properly.
œ Even if “OFF” is displayed, series recording will be
conducted if there is an input at the SERIES IN
terminal.
3 Press the REC button on VCR No.1.
ø Recording will start in series recording mode.
4 Set the security lock on VCR No.1.
Series recording connections
Monitor TV
Video camera
To VIDEO OUT jack
(VCR)
To
To
VIDEO IN
VIDEO IN
VCR No.1
VCR No.2
jack
jack
EXT
WARNING TAPE
SW
ALARM
OUT
EXT
WARNING TAPE
SW
ALARM
T
I
M
E
R
I
N
C
O
M
O
U
T
E
N
D
O
U
T
O
U
T
COM
IN
T
I
M
E
R
I
N
C
O
M
O
U
T
E
N
D
O
U
T
O
U
T
COM
OUT
IN
IN
A
RS485
B
A
RS485
B
CLOCK SET
S
E
R
I
E
S
O
U
T
/
S
E
R
I
E
S
TIMER
OUT
EJECT
CLOCK SET
S
E
R
I
E
S
O
U
T
.
S
E
R
I
E
S
TIMER
OUT
EJECT
OUT
OUT
IN
NON REC OUT
IN
COM
OUT
IN
OUT
IN
NON REC OUT
IN
COM
ADDRESS
ON
TERMINATE
ON
ADDRESS
ON
TERMINATE
ON
485
485
PUSH
OPEN
PUSH
OPEN
OFF
OFF
OFF
OFF
232
232
AUDIO
IN OUT
VIDEO
AUDIO
IN OUT
VIDEO
IN
OUT
IN
OUT
REMOTE MIC IN
REMOTE MIC IN
AC IN
~
AC IN
~
RS232C
RS232C
To
SERIES OUT
terminal
To
To
VIDEO OUT
jack
VIDEO OUT
jack
To
SERIES IN
terminal
To
To
To COM
terminal
SERIES OUT
terminal
VIDEO IN
jack
(VCR No. 3)
To COM
terminal
To COM terminal
(VCR No. 3)
To SERIES IN terminal
(VCR No. 3)
English
Download from Www.Somanuals.co2m5. All Manuals Search And Download.
SERIES RECORDING
Continous Loop Recording Setup
3 Press the REC button on VCR No.1.
It is possible to configure at least two this VCR for
continous loop recording.
ø Recording will start in series recording mode.
4 Set the security lock on VCR No.1.
Under loop recording when the recording finishes on the
first unit, the new recording will start on the second unit.
When the recording finishes on the second unit, recording
will start on the first unit.
NOTES:
œ The “TAPE END MODE” in (SET UP 3) menu should
be set to “REW” for both units without fail.
œ The SERIES OUT terminal of VCR No.2 and the
SERIES IN terminal No.1 should be connected (See
diagram).
œ In loop recording mode, the tape will be re-recorded
over. If you need to keep the recorded infomation,
please eject the tape after recording is complete and
insert a new tape.
œ Set the TAPE SELECT switch according to the
duration of the tape used.
1 Press the REC/PLAY SPEED l (or j) button to set
the recording speed mode.
2 Set the following items as indicated.
Item
VCR No.1
Loaded
Stop
VCR No.2
Loaded
Stop
Cassette tape
Operation mode
REPEAT REC switch
Counter memory
OFF
OFF
Canceled
Canceled
“OUTPUT” (in (SET UP
1) menu)
SERIES
REW
SERIES
REW
“TAPE END MODE” (in
(SET UP 3) menu)
“SERIES REC IN” (in
(SET UP 3) menu)
Y (YES)
Y (YES)
Timer recording
Security lock
OFF (not set) OFF (not set)
Canceled Set
Loop recording connection (example with 2 VCRs)
Monitor TV
Video camera
To VIDEO IN jack
To
To
VIDEO OUT
VIDEO IN
VCR No.1
VCR No.2
jack
jack
EXT
WARNING TAPE
SW
ALARM
OUT
EXT
WARNING TAPE
SW
ALARM
OUT
T
I
M
E
R
I
N
C
O
M
O
U
T
E
N
D
O
U
T
O
U
T
COM
IN
T
I
M
E
R
I
N
C
O
M
O
U
T
E
N
D
O
U
T
O
U
T
COM
IN
IN
A
RS485
B
A
RS485
B
CLOCK SET
S
E
R
I
E
S
O
U
T
/
S
E
R
I
E
S
TIMER
OUT
EJECT
CLOCK SET
S
E
R
I
E
S
O
U
T
/
S
E
R
I
E
S
TIMER
OUT
EJECT
OUT
OUT
IN
NON REC OUT
IN
COM
OUT
IN
OUT
IN
NON REC OUT
IN
COM
ADDRESS
ON
TERMINATE
ON
ADDRESS
ON
TERMINATE
ON
485
485
PUSH
OPEN
PUSH
OPEN
OFF
OFF
OFF
OFF
232
232
AUDIO
IN OUT
VIDEO
AUDI
IN OUT
VIDEO
IN
OUT
IN
OUT
REMOTE MIC IN
REMOTE MIC IN
AC IN
~
AC IN
~
RS232C
RS232C
To
To
SERIES OUT
terminal
To COM
terminal
SERIES OUT
terminal
To
VIDEO OUT
jack
To
SERIES IN
terminal
To
SERIES IN
terminal
To COM
terminal
Download from Www.Somanuals.co2m6. All Manuals Search And Download.
English
NORMAL PLAYBACK
Normal Playback
Tracking Control
If there is noise in the image during playback,
1 Turn on the power to the VCR and TV monitor.
2 Load the video cassette tape.
1 While looking at the playback picture, press and hold
the TRACKING/V. STILL+ button to minimize the
noise.
3 Press the REC/PLAY SPEED l (or j) button to
select the playback speed mode.
2 If it cannot be minimized, press the TRACKING/V.
STILL– button.
ø The selected playback speed mode is displayed
on the digital display.
NOTE:
Vertical Lock Control
During still image mode,
œ A slow motion effect or accelerated playback effect
can be achieved by using a slower or faster
playback speed than the speed used for recording.
1 Press and hold the TRACKING/V. STILL+ button to
reduce the vertical rolling of the image.
4 Press the PLAY button.
ø Playback starts.
2 If it cannot be corrected, press the TRACKING/V.
STILL– button.
ø If necessary, adjust the tracking to eliminate the
noise from the picture.
Sharpness Control
ø If the image is unstable (rolling vertically), adjust
Turn the SHARPNESS control clockwise or
the vertical lock control to correct.
counterclockwise for the desired sharpness of the image.
5 To stop playback, press the STOP button.
ø To advance or rewind the tape, turn the
Audio Playback
SHUTTLE ring clockwise or counterclockwise.
œ Audio playback is only possible in 8-hour, 24-hour and
40-hour modes. (When the TAPE SELECT switch is
set to “T-120”, in 6-hour, 18-hour and 30-hour modes.)
NOTES:
œ If a tape recorded in SP mode on a standard VCR is
loaded, playback will be done in 2-hour mode.
œ The playback speed has to be the same as the
recording speed, for normal playback of the audio.
œ This real time video recorder can playback recordings
made on a time lapse VCR from the same
manufacturer.
œ A tape recorded on a time lapse VCR produced by
another manufacturer may not play back with the same
degree of clarity on this unit.
œ When used with a multiplexer in 24- or 40-hour mode
playback (or when the TAPE SELECT switch is set to
“T-120”, in 18- or 30-hour mode playback), the image
may roll vertically. In such a case, in menu (SET UP 3)
set “VERTICAL SYNC.” to “N”.
English
Download from Www.Somanuals.co2m7. All Manuals Search And Download.
SPECIAL PLAYBACK
Picture Search (Forward and Reverse)
Reverse Playback
1 Turn the SHUTTLE ring clockwise (or
counterclockwise), during normal playback. See
“SHUTTLE Ring Operation”.
1 Turn the SHUTTLE ring counterclockwise and hold it,
during normal playback. See “SHUTTLE Ring
Operation”.
ø The image can be seen while the tape is
ø Reverse playback will start.
advanced (or rewound) at high speed.
2 To return to normal playback, release the SHUTTLE
2 To return to normal playback, release the SHUTTLE
ring.
ring.
NOTES:
NOTES:
œ During reverse playback, noise will appear in the
œ During picture search, noise (horizontal bars) will
picture.
appear in the picture.
œ Reverse playback is only possible during 8-hour
œ The sound is muted.
playback speed mode.
œ The sound is muted.
Still Image
Slow motion (Forward and Reverse)
1 Press the STILL/PAUSE button, during normal
playback.
1 Turn the SHUTTLE ring clockwise (or
counterclockwise) and hold it, during still image mode.
See “SHUTTLE Ring Operation”.
ø A still image can be viewed.
2 To return to normal playback, press the PLAY button.
ø Forward (or reverse) slow motion playback will
start.
NOTES:
œ If still mode continues for 5 minutes or more, the VCR
2 To return to normal playback, press the PLAY button.
will go into stop mode to avoid damaging the tape.
NOTES:
œ If the image is unstable (rolling vertically), adjust the
vertical lock control to correct.
œ If slow motion mode continues for 5 minutes or more,
the VCR will go into stop mode to avoid damaging the
tape.
Frame Advance
œ The sound is muted.
1 Turn the JOG dial clockwise (or counterclockwise),
during still image mode.
ø The still image is advanced (or rewound) of one
image (field).
ø Turn the dial faster to increase the speed of the
frame advance.
2 To return to normal playback, press the PLAY button.
NOTES:
œ During reverse frame advance, noise will appear in the
picture.
œ If frame advance mode continues for 5 minutes or
more, the VCR will go into stop mode to avoid
damaging the tape.
Download from Www.Somanuals.co2m8. All Manuals Search And Download.
English
SPECIAL PLAYBACK
Day/Time Search
1 Press the SEARCH button three times during stop
mode.
ø “T/D SEARCH 01 00:00” will be displayed on
screen.
TAPE COUNTER
Using the counter, it is easy to find a desired recording.
NOTES:
œ There is no tape counter indication for the blank
1 Press the COUNTER RESET button, at the beginning
portions of the tape.
of the desired recording.
œ In the 8-hour recording speed mode only, the tape
ø The counter will be reset to “0H 00M 00S”.
counter indicates real hours, minutes and seconds.
2 Press the COUNTER MEMORY button.
ø “[” is displayed on the digital display.
œ In the other recording speed modes, the tape counter
indication is a ratio of the 8-hour mode base indication.
(In 64-hour recording mode, each “second” of the tape
counter actually represents approximately 72/8 = 9 real
seconds.)
ø To cancel the counter memory function, press
the COUNTER MEMORY button a second time.
3 After recording or playback, turn the SHUTTLE ring
œ There may be a slight discrepancy between the
position shown on the tape counter and the actual tape
position.
counterclockwise from stop mode.
ø The tape is rewound to the counter “0H 00M 00S”
reading.
œ When rewinding the tape past the “0 00 00 ”
H
M
S
ø If you rewind the tape past the “0H 00M 00S”
position, turn the SHUTTLE ring clockwise.
position, a minus (–) sign will be displayed.
SETTING THE SECURITY LOCK
The security lock function is designed to prevent
accidental stopping of recording if the STOP button is
pressed inadvertently.
NOTES:
œ While the security lock is engaged all commands,
except the one to cancel the security lock, are disabled.
1 While holding the SHIFT « button, press the
REC/PLAY SPEED j button.
œ The security lock cannot be engaged while a menu is
displayed.
ø “ö” is displayed on the digital display.
To cancel the security lock, while holding the SHIFT
« button, press the REC/PLAY SPEED l button, “ö”
will be erased from the digital display.
Download from Www.Somanuals.co3m0. All Manuals Search And Download.
English
SETTING THE BUZZER
A buzzer can be set to sound during alarm recording, if
during recording the tape reaches the end, if buttons are
pressed or if there is a mechanical failure that causes the
tape to stop or be ejected, etc.
TAPE END. . The buzzer will be heard when the
end of the tape is reached during
recording. To stop the buzzer,
press the STOP, EJECT or PLAY
button, or turn the SHUTTLE ring.
1 Press the MENU button until the (SET UP 2) menu is
KEY IN . . . . . The buzzer will be heard when one
of the VCR buttons is pressed or
when the JOG dial or the
displayed.
@@@@@@@<SET@UP@2>
öDISPLAY
@@@DATE@@@@@@@@@@@Y
@@@TIME@@@@@@@@@@@Y
@@@ALARM@COUNT@@@@Y
@@@SPEED@@@@@@@@@@Y
öBUZZER
@@@ALARM@IN@@@@@@@Y
@@@TAPE@END@@@@@@@Y
@@@KEY@IN@@@@@@@@@N
@@@WARNING@@@@@@@@Y
SHUTTLE ring is turned.
WARNING . . The buzzer will be heard if the
heads are dirty and recording
qualtiy deteriorate, or if the tape
stops or is ejected due to a
2 Turn the JOG dial, until the desired item for which the
problem with the internal
mechanism. To stop the buzzer,
press the STOP button.
buzzer function will be set is flashing.
3 Turn the SHUTTLE ring to set “Y” for the functions
described below.
4 Press the SEARCH button to save the setting.
ø The setting procedure is now completed.
ALARM IN . . The buzzer will be heard during
alarm recording.
NOTES:
œ If “N” is set, the buzzer will not be heard.
œ During timer recording mode, security lock engaged
mode and alarm recording mode, the buzzer will not be
heard when a button related to one of these modes is
pressed, even if “Y” is set for the “KEY IN” item.
CLOCK ADJUSTMENT
When using 2 or more VCRs of this same model, the
clock on the second VCR and on, can be synchronized
with the clock on the first VCR, using the CLOCK
ADJUSTMENT function.
Example
@@@@@@@<SET@UP@3>
öALARM@MODE@@@@@@@Y1
öALARM@DURATION@@@20S
öVERTICAL@SYNC@@@@Y
öEXT@TIME@ADJ.@@@@03:00
öTAPE@IN@MODE@@@@@STOP
öTAPE@END@MODE@@@@REW
öTAPE@END@OUT@@@@@-3M
öCLOG@DETECT.@@@@@Y
öSERIES@REC@IN@@@@N
öRS-232C@@@@@@@@@@19200
1 Connect the CLOCK SET OUT terminal on VCR 1 to
the CLOCK SET IN terminal on VCR 2.
2 Repeat the procedure for all the other VCRs,
connecting the CLOCK SET OUT terminal on VCR 2
to the CLOCK SET IN terminal on VCR 3, and so on.
6 Press the SEARCH button to save the setting.
ø The setting procedure on the first VCR is now
completed.
3 Press the MENU button until the (SET UP 3) menu is
displayed.
7 Repeat the procedure for all the other VCRs, setting
“EXT TIME ADJ.” (to the same time as set on the first
VCR).
4 Turn the JOG dial, until the “EXT TIME ADJ.” setting
is flashing.
5 Turn the SHUTTLE ring to set the hour at which the
NOTES:
adjustment will be conducted.
œ Connect the COM terminal on all VCRs used.
NOTES:
œ This function will not operate on the day the daylight
saving/standard time is changed.
œ Be sure to set the same time on all the VCRs.
œ The clock adjustment cannot be set to “00:00”.
English
Download from Www.Somanuals.co3m1. All Manuals Search And Download.
SETTING THE CASSETTE EJECT MODE
EJECT terminal connection
Cassette Eject Setup
VCR No. 1
VCR No. 2
When using 2 VCRs or more, the cassette tape of all the
VCRs or some of the VCRs can be ejected, if the EJECT
terminals on the VCRs are connected as indicated.
EJECT
COM OUT
EJECT
COM OUT IN
IN
1 Press the MENU button until the (SET UP 4) menu is
displayed.
@@@@@@@<SET@UP@4>
öSW@OUT
@@FIELD@@@@@@@@@01
@@TIMING@@@@@@@@FIELD
@@8H@@@@@@@@@@@@Y
öTHREAD@CHECK@@@Y
öVIDEO@LOSS@@@@@N
öREC@SPEED@@@@@@N
öEJECT@SET
EJECT IN terminal
œ Depending on the (SET UP 4) menu “EJECT
MODE” setting (see “Cassette Eject Setup”), the
cassette loaded in the VCR is ejected when there
is an input at this terminal.
@@EJECT@MODE@@@@EJECT1
@@OPERATION@@@@@SLAVE
2 Turn the JOG dial, until the “EJECT MODE” setting is
flashing.
EJECT OUT terminal
3 Turn the SHUTTLE ring to set the desired cassette
œ When the EJECT button is pressed (if the VCR is
setup as “MASTER”, see step 5 under “Cassette
Eject Setup”) or when there is an input (trigger) at
the EJECT IN terminal, a signal is output at this
terminal, even if the security lock is set or if a
cassette is not loaded.
eject mode.
EJECT1 . . . . The cassette is ejected only if the
VCR is not in recording mode.
EJECT2 . . . . The cassette is ejected only if the
VCR is in stop mode.
4 Turn the JOG dial clockwise, until the “OPERATION”
setting is flashing.
5 Turn the SHUTTLE ring to set the desired operation.
SLAVE . . . . . When the EJECT button is pressed,
the cassette tape of that VCR only will
be ejected.
MASTER . . . When the EJECT button is
pressed, the cassette tape of that
VCR and of any VCR connected
after it will be ejected.
6 Press the SEARCH button to save the settings.
ø The setting procedure is now completed.
NOTE:
œ The EJECT button will not be operative during
recording mode.
Download from Www.Somanuals.co3m2. All Manuals Search And Download.
English
SETTING THE RS-232C OR RS-485 DATA
TRANSFER SPEED
The VCR can be controlled by a computer connected to
the RS-232C connector. It can also be controlled through
a special controller connected to the RS-485 connector.
Data Transfer Speed Setup
1 Press the MENU button until the (SET UP 3) menu is
displayed.
You must specify which connector (RS-232C or RS-485)
is used. (Refer to “Data Transfer Speed Setup.”)
@@@@@@@<SET@UP@3>
öALARM@MODE@@@@@@@Y1
öALARM@DURATION@@@20S
öVERTICAL@SYNC@@@@Y
öEXT@TIME@ADJ.@@@@01:00
öTAPE@IN@MODE@@@@@STOP
öTAPE@END@MODE@@@@REW
öTAPE@END@OUT@@@@@-3M
öCLOG@DETECT.@@@@@Y
öSERIES@REC@IN@@@@N
öRS-232C@@@@@@@@@@19200
DIP Switches Setup
The DIP switches need to be set when a computer,
special controller, etc. connected to the RS-232C or
RS-485 connectors is used to control the VCR. Make sure
to turn the VCR power off before setting the DIP switches.
2 Turn the JOG dial, until the “RS-232C” or “RS-485”
setting is flashing.
ADDRESS
ON
TERMINATE
ON
485
NOTE:
ON
1
œ The display will depend on the DIP switch 9
setting. When down “RS-232C” is displayed and
when up “RS-485” is displayed.
2
3
4
5
6
7
8
9
10
OFF
OFF
232
3 Turn the SHUTTLE ring to set the desired transfer
SW No.
speed.
1-7: To setup the VCR address (only when using the
RS-485 connector).
19200
2400
4800
9600
œ Switch 1 is the least significant bit (LSB) and
switch 7 the most significant bit (MSB) (Down: 0,
Up: 1)
4 Press the SEARCH button to save the setting.
Example:
RS232C 9-pin connector layout
1
5
œ If the address is 1, set switch 1 to the ON side
(up)
œ If the address is 10, set switches 2 and 4 to the
6
9
ON side (up)
œ If the address is 127, set all the switches to the
Pin
number
Signal Operation
Signal direction
ON side (up)
8: Available (Not used)
Receive
2
3
7
RXD
data
VCR ← Computer
VCR → Computer
VCR → Computer
9: To select the connector used. [232] side (down) for
RS-232C, [485] side (up) for RS-485.
10: To setup the termination (only when using the
RS-485 connector).
TXD
Send data
Request
to send
RTS
OFF side (down): Not terminated
Signal
ground
ON side (up): Terminated
5
GND
NOTE:
The signal transmission is compatible with RS-232C
specifications.
œ Refer to the RS-232C and RS-485 command section or
to the special controller and/or to the computer
instruction manual.
English
Download from Www.Somanuals.co3m3. All Manuals Search And Download.
SETTING THE RS-232C OR RS-485 DATA TRANSFER SPEED
RS485 RJ-11 connector layout
RS-485 Connection
This VCR can use the straight type or crossed type
connecting cables.
If using a straight type cable, connect it from the “A” to the
“A” or from the “B” to the “B” RS-485 connector.
1
6
NOTE: Do not connect to phone line.
If using a crossed type cable, connect it from the “A” to
the “B” or from the “B” to the “A” RS-485 connector.
Connector A
Pin number
Connector B
signal
signal
Types of cables
1
2
3
4
5
6
Not used
Not used
A
Not used
Not used
B
Straight type: A cable with pin connection number
correspondence (e.g. pin 1 to pin 1, pin 2
to pin 2, etc.).
B
A
Crossed type: A cable without pin connection number
correspondence.
Not used
Not used
Not used
Not used
A: Non-inverting driver output/receiver input
B: Inverting driver output/receiver input
CHECKING POWER FAILURE, FAILURE DUE TO
CONDENSATION AND USAGE DURATION
Example
1 Press the MENU button until the (POWER FAILURE),
(DEW) and (USED TIME) menu is displayed.
@@@@<POWER@FAILURE>
002@FAILURE@@12-25@07:15
@@@@RECOVERY@12-25@07:30
(POWER FAILURE). . . The number of power
failures, and the date and
time of the most recent
@@@@@@@@@<DEW>
001@FAILURE@@12-25@11:00
@@@@RECOVERY@12-25@12:00
@@@@@@<USED@TIME>
@@@@VIDEO@@@@@@@@@@00003H
@@@@POWER@@@@@@@@@@00007H
power failure and recovery
are displayed.
(DEW) . . . . . . . . . . . . . The number of failures due
to condensation, and the
2 Press the SEARCH button, the normal screen is
displayed.
date and time of the most
recent failure and recovery
are displayed.
NOTE:
œ If the MENU RESET button is pressed while the
(POWER FAILURE) and (DEW) menu is displayed, the
data is erased. The (USED TIME) data cannot be reset.
“@” will be erased from the digital display.
(USED TIME). . . . . . . . The video heads usage
duration and the power on
duration are displayed.
Download from Www.Somanuals.co3m4. All Manuals Search And Download.
English
OUTPUT TERMINALS
TAPE END OUT Terminal
WARNING OUT Terminal
œ During recording, when the end of the tape is reached
or when the tape counter reading indicates 7 hours 57
minutes or more, the output becomes 0V (Low).
œ If the tape stops or other problem, the output becomes
0V (Low).
œ To reset the output, press the STOP or ALL RESET
œ To reset the output, press the STOP or EJECT button.
button or unplug the power cord then plug it back in.
œ During autorepeat recording, when the end of the tape
is reached, the output becomes 0V (Low) for about 2
seconds only.
Tape movement stop
Output reset
5V (H)
Tape end or 7H57M00S
Output reset
(Output impedance: 5.7 kΩ)
0V (L)
5V (H)
(Output impedance: 5.7 kΩ)
NOTE:
0V (L)
œ If the output is 0V (Low) due to the clog detect function,
it can be reset by simply pressing the STOP button.
TAPE END OUT Terminal Output Setting
1 Press the MENU button until the (SET UP 3) menu is
TIMER OUT Terminal
displayed.
@@@@@@@<SET@UP@3>
œ During timer recording DC 12 V (High) are output.
(During timer recording stand-by mode, the output is
0V (Low).)
öALARM@MODE@@@@@@@Y1
öALARM@DURATION@@@20S
öVERTICAL@SYNC@@@@Y
öEXT@TIME@ADJ.@@@@01:00
öTAPE@IN@MODE@@@@@STOP
öTAPE@END@MODE@@@@REW
öTAPE@END@OUT@@@@@-3M
öCLOG@DETECT.@@@@@Y
öSERIES@REC@IN@@@@N
öRS-232C@@@@@@@@@@19200
Timer recording
12V (H)
(Output impedance: 5.7 kΩ)
2 Turn the JOG dial, until the “TAPE END OUT” setting
0V (L)
is flashing.
3 Turn the SHUTTLE ring, to select the desired output
mode.
COM Terminal
–3M . . . . . . . The output becomes 0 V (Low)
when the tape counter reaches
œ Common GND (ground) terminal when connecting
other terminals to external devices.
“7 57 00 ” and/or when the tape
H
M
S
reaches the end.
END . . . . . . . The output becomes 0 V (Low)
when the tape reaches the end.
4 Press the SEARCH button to save the setting.
English
Download from Www.Somanuals.co3m5. All Manuals Search And Download.
OUTPUT TERMINALS
SW OUT Terminal
6 Turn the SHUTTLE ring, to set the desired “8H” mode.
Y. . . . . . . . . . When recording in 8-hour mode, a
pulse signal is output.
When recording, a pulse signal is output at the SW OUT
terminal.
N . . . . . . . . . When recording in 8-hour mode, a
pulse signal is not output.
This terminal is usually connected to the switch input (SW
IN) of devices like a camera switcher unit, or a quad
compressor.
7 Press the SEARCH button to save the settings.
FIELD: 16.7 msec.
FRAME: 5 msec.
SERIES OUT/NON REC OUT terminal
setting
5V (H)
(Output impedance: 5.7 kΩ)
0V (L)
The output at the SERIES OUT/NON REC OUT terminal
can be set.
SW OUT Terminal Output Setting
1 Press the MENU button until the (SET UP 1) menu is
1 Press the MENU button until the (SET UP 4) menu is
displayed.
displayed.
@@@@@@@<SET@UP@1>
ø The FIELD (or FRAME) setting is flashing.
öDAYLIGHT@SET@@@@@USE
@@@@@@@@WEEK@MONTH@TIME
@ON@@@1ST-SUN@@04@02:00
@OFF@@LST-SUN@@10@02:00
öOUTPUT@@@@@@@@SERIES
öCLOCK@SET
@10-15-99@FRI@@15:20:00
öREMOTE@@@@@@@@EJECT
öLANGUAGE-LANGUE-IDIOMA
@@@ENGLISH
@@@@@@@<SET@UP@4>
öSW@OUT
@@FIELD@@@@@@@@@01
@@TIMING@@@@@@@@FIELD
@@8H@@@@@@@@@@@@Y
öTHREAD@CHECK@@@Y
öVIDEO@LOSS@@@@@N
öREC@SPEED@@@@@@N
öEJECT@SET
@@EJECT@MODE@@@@EJECT1
@@OPERATION@@@@@SLAVE
2 Turn the JOG dial, until the “OUTPUT” setting is
flashing.
NOTE:
3 Turn the SHUTTLE ring, to select the desired output
œ If “TIMING” is set to FRAME (see step 4),
mode.
“FRAME” will be indicated instead of “FIELD”.
SERIES . . . . If during series recording, the
counter reading reaches
2 Turn the SHUTTLE ring, to set the desired pulse
signal interval.
7 57 00 or the tape reaches the
H
M
S
end, a LOW signal (0 V) is output.
The LOW (0 V) signal is output for
about 70 seconds after the end of
the tape is reached.
Available settings are:
FIELD. . . . . . 01, 02, 03, 04, 05, 10, 30 or 60 field
FRAME . . . . 01, 02, 03, 04, 05, 10, 30 or 60 frame
3 Turn the JOG dial clockwise until the “TIMING”
NON REC . . If during recording the VCR enters
a mode other than recording (i.e.
recording pause, stop mode, etc.),
a LOW signal (0 V) is output. If
recording is resumed, then a HIGH
signal (5 V) is output.
setting is flashing.
4 Turn the SHUTTLE ring, to set “FIELD” or “FRAME”.
FIELD. . . . . . 1 pulse is output after each set
number of fields.
If in the (SET UP 2) menu, in the
BUZZER section, WARNING is set
to “Y”, a buzzer will be heard while
the VCR is in non recording mode.
The buzzer will stop if the STOP
button is pressed (the output signal
will remain LOW (0 V)).
FRAME . . . . 1 pulse is output after each set
number of frames.
5 Turn the JOG dial clockwise until the “8H” setting is
flashing.
NOTE:
œ If the TAPE SELECT switch to the “T-120”, “6H”
4 Press the SEARCH button to save the setting.
will be indicated instead of “8H”.
Download from Www.Somanuals.co3m6. All Manuals Search And Download.
English
OUTPUT TERMINALS
REMOTE Jack
Remote control setting
You can use a VA-RMN01 Remote Control Unit (sold
separately) to control remotely the VCR.
The remote control switch 7 can be set to either eject the
tape or access the menus.
1 Press the MENU button until the (SET UP 1) menu is
NOTE:
displayed.
œ The functions not available on the VCR will not operate.
@@@@@@@<SET@UP@1>
öDAYLIGHT@SET@@@@@USE
@@@@@@@@WEEK@MONTH@TIME
@ON@@@1ST-SUN@@04@02:00
@OFF@@LST-SUN@@10@02:00
öOUTPUT@@@@@@@@SERIES
öCLOCK@SET
@10-15-99@FRI@@15:20:00
öREMOTE@@@@@@@@EJECT
öLANGUAGE-LANGUE-IDIOMA
@@@ENGLISH
Remote control of the VCR is possible by connecting a
remote controller with a circuit such as indicated below, to
the REMOTE jack.
NOTES:
œ Use a 3.5 mm mini-jack type plug.
2 Turn the JOG dial, until the “REMOTE” setting is
œ The connection should be done using a shielded cable
flashing.
no more than 5 meters long.
3 Turn the SHUTTLE ring, to select the desired switch
œ The functions not available on the VCR will not operate.
mode.
EJECT . . . . . Switch 7 will eject the tape.
MENU . . . . . Switch 7 will display the menu.
Remote control circuit
4 Press the SEARCH button to save the setting.
R0 1.2K
SW0: EJECT
R1 0.3K
SW1: STOP
R2 0.43K
SW2: STILL/PAUSE
R3 0.51K
SW3: REW
R4 0.62K
SW4: FF
R5 0.75K
SW5: PLAY
R6 0.91K
SW6: REC
R7 1.1K
SW7: EJECT (or MENU)
R8 1.3K
SW8: REV
R9 2.0K
SW9: REC/PLAY SPEED j, j
R10 2.4K
SW10: REC/PLAY SPEED l, l
R11 3.6K
SW11: SHIFT ], »
R12 5.6K
SW12: SHIFT «, «
The resistance tolerance is
2% or less.
English
Download from Www.Somanuals.co3m7. All Manuals Search And Download.
MAINTENANCE
Daily Inspection
Periodic Inspection
The following daily inspections are recommended in order
to assure long-term and trouble-free operation of the unit.
Periodic inspection and maintenance should be referred
to your dealer.
The daily inspections are particularly important if using
autorepeat recording.
If there is noise in the playback picture, and it cannot be
corrected using the tracking control, it may indicated that
the video heads need cleaning.
The video heads should be inspected every 1,000 hours
of use to determine if they need to be replaced.
Inspection Procedure
1 Turn on the power to the VCR, camera, TV monitor
The video heads usage can be checked using the (USED
TIME) menu.
and other connected devices.
2 Check that the image received on the TV monitor is
correct.
Cabinet Cleaning
Clean the outside of the cabinet with a clean, soft cloth,
moistened with lukewarm water and wrung dry.
3 Check that the on-screen display of the date and time
is correct.
4 To check the recording condition of the previous day,
rewind the recorded tape a few seconds.
DO NOT USE SOLVENTS OR OTHER TYPES OF
CLEANERS. THESE CHEMICALS CAN CRACK OR
DISCOLOR THE CABINET.
5 Press the PLAY button and check that the playback
image is correct.
6 Check that the recorded date and time are correct.
About the Backup Battery
NOTES:
The date and time settings are maintained for up to 30
days by a rechargeable lithium battery that is fully
charged after the VCR has been connected to a power
source for 48 hours or more.
œ If the security lock is engaged, it has to be released
before proceeding to the inspection.
œ If any problem is discovered during the inspection,
unplug the power cord then consult your dealer.
Depending on the battery usage it may become
necessary to change it. For replacement and disposal of
the old battery, please contact your dealer.
After the battery has been replaced, press the ALL
RESET button, then enter all the time, date, etc. settings
as required.
Download from Www.Somanuals.co3m8. All Manuals Search And Download.
English
MAINTENANCE
Maintaining and Checking The Mechanism
To maintain the VCR functions and features working properly, and to avoid damages or dirt on the tape, it is
recommended to follow the maintenance points and periodicity indicated below.
For detailed information, please contact your dealer.
Maintenance Table
F : Cleaning
E : Confirmation
8000H
k
v: Lubrication
k : Change
PARTS
Tape Path System ASSY, BRAKE BAND
ASSY, LEVER BT (tape guide)
2000H
4000H
6000H
NOTES
E
F
F
E
F
F
F
F
F
k
F
F
k
F
F
F
F
k
E
F
F
E
F
F
F
F
F
F
FULL ERASE HEAD
k
ASSY, ROLLER CLEANER
ASSY, GUIDE ROLLER
ASSY, MOUNTING INCLNE S
ASSY, MOUNTING INCLNE T
ACE HEAD
ASSY, LEVER PINCH ROLLER
MOUNTING, LIFT PINCH
CAM, LIFT PINCH
k
F
k
k
k
k
k
k
GEAR, CAM PINCH
k
ASSY, EARTH CYL
COMPL, CYLINDER
ASSY, CYLINDER UPPER
k
F(k)
F(k)
Fv
Fv
v
k
F
F(k)
Fv
Fv
v
F
F(k)
Fv
Fv
v
F(k)
F(k)
Fv
Fv
v
v
v
E
Reel Drive System ASSY, REEL SUPPLY
ASSY, REEL TAKEUP
GEAR, REEL S
GEAR, REEL T
v
v
v
PULLEY, REEL
v
v
v
SPECIAL, WASHER 2.4 X 6 X 0.25
COMPL, MOUNTING CLUTCH
BELT, REEL
MOTOR, CAPSTAN
ASSY, GEAR FRICTION
ASSY, BRAKE S
E
v
E
F
v
E
E
E
k
v
k
k
k
E(k)
vk
E
E(k)
v
k
vk
E
Brake
E
ASSY, BRAKE T
E
E
E
ASSY, BRAKE CAPSTAN
ASSY, BRAKE SOFT T
ASSY, LOADING MOTOR
DAMPER
E
E
E
E
k
Loading Drive
System
E
k
k
COMPL, GEAR WORM
CAM, MAIN
SPECIAL WASHER 3.6 X 0.5
GEAR, WHEEL 1
E
E
k
k
k
k
GEAR, WHEEL 2
MODE SWITCH
E
E
E
E
E
E
E
E
E
E
E
k
k
SLIDE, CRECENT
GEAR, LOAD S
GEAR, RACK FRONT
GEAR, RACK START
GEAR, PINON
BACK TENSION TORQUE
FWD, REW TORQUE
PLAY TORQUE
k
k
k
k
k
Performance
Check
E
E
E
E
E
E
E
E
E
PB BACK TENSION TORQUE 25~50g⋅cm
FWD, REW TORQUE ≥ 600g⋅cm
PLAY 55 ~ 110g⋅cm
E
E
REV TORQUE
E
REV 100 ~ 210g⋅cm
NOTE:
1. This table shows the maintenance for up to 8000 hours. After this, repeat from the start or the table.
2. For places with symbols such as E (k) and F (k), carry out checking and cleaning, and replace if necessary.
3. This periodic maintenance check table changes considerably according to the using conditions and environment.
4. Refer to (USED TIME) menu for the length of time the unit has been used.
5. As life may be shortened if foreign particles and dusts remain accumulated on the tape guides and rotating and contacting portions, clean if dirty.
6. Dusts and other foreign particles on the tape guides may also shorten the tape life and lower picture quality, therefore clean thoroughly.
English
Download from Www.Somanuals.co3m9. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
If the unit does not operate normally when you follow the instructions indicated in the manual, please refer to the table
below.
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
No power
The power cord is not connected
The connections are not correct
Connect the power cord
No image displayed on
the monitor TV
Check that all connections are correct
The power to the camera and/or monitor TV Turn all connected devices power on
is not turned on
The buttons do not
respond
A cassette tape is not loaded
Load a cassette and turn the power on
All functions are suspended due to
condensation
Wait for the “À” indicator to go off
Alarm recording
Wait for the alarm recording to end
Cancel the security lock
The security lock is engaged
Recording is not
possible (the tape is
ejected)
The loaded cassette has no
erasure-prevention tab
Load a cassette tape with
erasure-prevention tab or cover the tab hole
with adhesive tape
Autorepeat recording is
not possible
“AL” is displayed on the digital display
Display (ALARM TIME) menu, then press
the MENU RESET button to turn off the “AL”
indicator
Timer recording is not
possible
The date and time are not set correctly
Set the date and time correctly
The unit is not set to timer recording
stand-by mode
Press the TIMER button to display “n” on
the digital display
“N” is selected for the timer recordings
Be sure to select “Y” for the programmed
timer recordings
Alarm recording is not
possible
“OFF” is displayed on the digital display
Press the EJECT, STOP or PLAY button or
turn the SHUTTLE ring to turn the indicator
off
Noise in the playback
picture
The video heads need cleaning
Clean the video heads
The date and time are
not recorded
The ON SCREEN switch is set to the “OFF” Set the ON SCREEN switch to the “ON”
position
position
The cassette tape
cannot be ejected
Problem with the system
Unplug the power cord then plug it back in
The cassette is ejected
a few seconds after it
has been inserted
The tape is not threaded correctly
Try inserting the cassette one more time or
using a new cassette. If it is ejected again,
please consult your dealer.
After a Power Failure
System Down
If after a power failure the recording speed is reset to
8-hour mode, it is due to insufficient backup battery
charge. This is not a malfunction.
If the unit does not function at all, try the following.
1 Unplug the power cord then plug it back in.
2 Reset the memory. (Press the ALL RESET button.
Under normal conditions, do not touch the ALL
RESET button.)
3 If the problem is not corrected after performing steps
1 and 2 a few times, consult your dealer.
Download from Www.Somanuals.co4m0. All Manuals Search And Download.
English
SPECIFICATIONS
General Specifications
Video heads system
Dual-azimuth 4-head rotating helical scanning system:
Dual azimuth 2-head for record and standard playback
Dual azimuth 4-head for forward picture search, reverse picture search
and still mode
Audio recording
In 8-, 24- and 40-hour modes (when using T-160 tape)
In 6-, 18- and 30-hour modes (when using T-120 tape)
11.12 mm /sec (8-hour mode)
Tape speed
Specified video cassette tape
Recording/playback time
VHS 1/2 inch video cassette tape
8, 24, 40, 64, 96, 128, 160 and 224 hours (when using T-160 tape)
6, 18, 30, 48, 72, 96, 120 and 168 hours (when using T-120 tape)
approximately 3 minutes 30 seconds (when using T-160 tape)
NTSC color TV system
Fast forward/rewind time
Television system
RS-232C/RS-485 data transfer speed 19200, 9600, 4800, 2400 baud
Video
Recording method
Luminance signal: FM recording
Chrominance signal: Down-converted direct recording
1 V(p-p), BNC, 75 Ω, unbalanced
Video input
Video output
Horizontal resolution
1 V(p-p), BNC, 75 Ω, unbalanced
Black & white mode
Color mode
350 line or more
300 line or more
Audio
Input
Output
Microphone input
–8 dBs, RCA pin jack, 27 kΩ, unbalanced
–8 dBs, RCA pin jack, 600 Ω, unbalanced
–60 dBs, 3.5 mm mini jack, 10 kΩ, unbalanced
Connectors
Alarm input
Alarm output
Low level active (0V 100msec or more)
DC 5 V (±0.5)/5.7 kΩ, Low at alarm
DC 5 V (±0.5)/5.7 kΩ, Low at switching
DC 5 V (±0.5)/5.7 kΩ, Low at tape end
DC 5 V (±0.5)/5.7 kΩ, Low at warning
Low level active (0V 100msec or more)
Low level active (0V 100msec or more)
DC 5 V (±0.5)/5.7 kΩ, Low at eject in
DC 12 V (±0.5)/5.7 kΩ, High at timer recording
Low level active (0V 100msec or more)
DC 5 V (±0.5)/5.7 kΩ
Switch output
Tape end output
Warning output
Ext timer input
Eject input
Eject output
Timer output
Series input
Series output/Non rec output
Clock set input
Clock set output
Common
Low level active (0V 100msec or more)
DC 5 V (±0.5)/5.7 kΩ, Low at clock set in
0 V (GND)
Remote control input
3.5 mm mini jack
Other Specifications
Operating temperature range
Operating humidity range
Power requirements
Power consumption
Dimensions
5°C to 40°C
80% or less
120 V AC, 60 Hz
17 W
420 (W) x 99.5 (H) x 295.5 (D) mm
approximately 4.4 kg
Weight
NOTE: The specifications and external appearance of this unit are subject to change without notice.
English
Download from Www.Somanuals.co4m1. All Manuals Search And Download.
SANYO INDUSTRIAL
VCR WARRANTY
OBLIGATIONS
In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user’s expense,
unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the
toll-free number listed below.
For product operation, authorized service center referral, service assistance or problem resolution, call
CUSTOMER INFORMATION 1-800-421-5013
Weekdays 8:30 AM – 5:00 PM Pacific Time
For accessories and/or parts, call
PARTS ORDER INFORMATION 1-800-726-9662
Weekdays 8:30 AM – 5:00 PM Pacific Time
THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED OR RENTED IN THE UNITED STATES OF AMERICA, EXCLUDING ALL
U.S. TERRITORIES AND PROTECTORATES. THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER OR END-USER. THE
ORIGINAL DATED BILL OF SALE, SALES SLIP OR RENTAL AGREEMENT MUST BE SUBMITTED TO THE AUTHORIZED SANYO SERVICE
CENTER AT THE TIME WARRANTY SERVICE IS REQUESTED.
Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO Fisher Company warrants this SANYO product against defects in materials
and workmanship for the periods specified below. SFC will repair or replace (at its option) the product and any of its parts which fail to conform to this
warranty. The warranty period commences on the date the product was first purchased or rented at retail.
LABOR
1 YEAR
PARTS
1 YEAR
VIDEO HEADS
90 DAYS
EXCLUSIONS
This warranty does not cover (A) the adjustment of customer-operated controls as explained in the appropriate model’s instruction manual, or (B) the
repair of any product whose serial number has been altered, defaced or removed.
This warranty shall not apply to the cabinet or cosmetic parts, batteries or routine maintenance.
This warranty does not apply to uncrating, setup, installation, removal of the product for repair or reinstallation of the product after repair.
This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SFC including, but not limited to, any
malfunction, defect or failure caused by or resulting from unauthorized service or parts, improper maintenance, operation contrary to furnished
instructions, shipping or transit accidents, modification or repair by the user, abuse, misuse, neglect, accident, incorrect power line voltage, fire, flood
or other Acts of God, or normal wear and tear.
The foregoing is in lieu of all other expressed warranties and SFC does not assume or authorize any party to assume for it any other
obligation or liability.
SFC DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED, WITH REGARD TO THIS PRODUCT (INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS). IN NO EVENT SHALL SFC BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING FROM THE OWNERSHIP OR USE OF THIS PRODUCT OR FOR ANY DELAY IN THE PERFORMANCE OF ITS OBLIGATIONS UNDER
THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL. SFC’S LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING
FROM ANY CAUSE WHATSOEVER, ARISING OUT OF OR IN CONNECTION WITH THE SALE, USE OR OWNERSHIP OF THIS PRODUCT
INCLUDING WARRANTOR’S NEGLIGENCE, ALLEGED DAMAGED OR DEFECTIIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE
OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
ATTENTION
For your protection in the event of theft or loss of this product, please fill in the information below for you own personal records.
Model No.
_____________________________________________
Serial No.
______________________________________________
(Located on back or bottom side of unit.)
Date of Purchase
Where Purchased
_______________________________________
Purchase Price
_________________________________________
_________________________________________________________________________________________________
42
English
SANYO Electric Co., Ltd.
1AC6P1P2096–AC
RC4QR/U
(0601KP-SY01)
Issue No. 6
Copyright SANYO, 2000 All rights reserved.
Printed in Japan
|