POWERSHRED
®
OPERATING INSTRUCTIONS
NOTICE D'UTILISATION
MANUAL DEL PROPIETARIO
BETRIEBSANLEITUNG
POWERSHRED 320
ON
190
200
220
220CC
1.294.999.110 – Edition 09/98
190
200
220
Contents
220 CC
Contents
Page
1.
2.
3.
4.
5.
6.
7.
8.
9.
Important Safety Instructions .................................................................................. 4
Parts Identification .................................................................................................. 4
Caution ................................................................................................................... 4
Technical Specifications ......................................................................................... 5
Supplies .................................................................................................................. 6
Installation .............................................................................................................. 6
Operation ................................................................................................................ 6
Checklist for Inoperative Machine .......................................................................... 7
Malfunctions ........................................................................................................... 7
10. Maintenance ........................................................................................................... 7
11. Warranty ................................................................................................................. 8
12. Customer Service ................................................................................................... 8
Edition 09/98
1.294.999.110
3
USA
190
200
220
220 CC
Paper shredder
1. Important Safety Instructions
2. Parts Identification
1. Read all instructions before use.
2. Save these instructions for later use.
3. Follow all warnings and instructions
marked on the proudct.
1
9
2
3
POWERSHRED 320
8
4
Fellowes Manufacturing Co.
1789 Norwood Avenue
Itasca, IL 60143 USA
ON
R
Model:
Serial #:
Voltage:
Current:
4. Unplug this product before cleaning.
Clean with a damp cloth using a mild
soap and water solution. (Do not use
abrasives or petroleum products.)
5. Place this product as close as possible to
power source for quick and easy
unplugging.
Motor:
Manufactured:
R
R
7
5
6
6. Do not use this product near water.
7. This product should never be placed near
or over a radiator or heat source.
8. Operate from the type power source
indicated on the marking label. If you are
not sure of the type of power available,
consult your dealer or local electric
company.
9. Do not allow anything to rest on the power
cord. Do not place this product where
people may walk on the cord.
1. LED display ( 220 series only)
2. Rocker switch
3. Cover
4. Serial label
5. Caution label
6. Cabinet
7. Waste container
8. Paper feed opening
9. Automatic start stop control ( 190/200 series only)
10. If an extension cord is used with this
product, make sure that the total of the
ampere ratings on the products plugged
into the extension cord do not exceed the
extension cord ampere rating. Also, make
sure that the total of all products plugged
into the wall outlet does not exceed 15 amps.
11. Do not attempt to service this product
yourself, as opening or removing covers
may expose you to dangerous live parts
or other risks.
3. Caution
12. Unplug this product and refer servicing to
qualified personnel under the following
conditions:
Never insert hand, fingers or any
foreign objects into the feed
opening.
A) When the power cord or plug is damaged
or frayed.
Serious injury may result.
B) If liquid has been spilled on the product.
C) If the product has been exposed to rain.
D) If the product does not operate normally
when the operating instructions are
followed.
Keep all loose articles of
clothing, ties, jewelery, long hair
or other loose objects away from
feed opening.
E) If the product has been dropped or
the casing has been damaged.
Injury may result.
13. Keep out of reach of children.
14. This shredder should be operated only with an
operator in attendance.
Always turn off and unplug the
machine before moving,
servicing, cleaning or any other
conduct other than normal
operation.
Serious injury may result.
4
1.294.999.110
Edition 09/98
USA
190
200
220
Paper shredder
220 CC
4. Technical Specifications
Model 190
Model 200
Model 220
Model 220CC
Cutting style
Shred size
Strip cut
Strip cut
Strip cut
Cross cut
1/4"
5/32"
5/32"
5/32" x 1"
(5.8 mm)
(3.9 mm)
(3.9 mm)
(3.9 x 30 mm)
Security rating DIN 32757–1
2
2
2
3
Sheet capacity -
8-1/2" x 11" - 20 lb.
A4, 70g/m2 (16 lb.)
16
20
12
14
12
14
8
10
Speed
20FPM
20FPM
20FPM
22FPM
(80 mm/s)
(80 mm/s)
(80 mm/s)
(90 mm/s)
Entry width
Motor power
approx. 93/4"
(240 mm)
approx. 93/4"
(240 mm)
approx. 93/4"
(240 mm)
approx. 93/4"
(240 mm)
1/3 H.P.
1/3 H.P.
1/3 H.P.
1/3 H.P.
(0.12 kw)
(0.12 kw)
(0.12 kw)
(0.12 kw)
Input voltage
(Depending on country)
100V, 50 Hz
115V, 60 Hz
100V, 50 Hz
115V, 60 Hz
100 V, 50 Hz
115V, 60 Hz
100 V, 50 Hz
115V, 60 Hz
220/240V, 50 Hz 220/240V, 50 Hz 220/240V, 50 Hz 220/240V, 50 Hz
143/4" x 10" x 211/2" (375 x 250 x 550 mm)
241/4 lbs. (11 kg)
Dimensions
Weight
Waste container volume
Noise level
7.6 gallons (29 liters)
53 dB in idle – 59 - 63 dB under load
Edition 09/98
1.294.999.110
5
USA
190
200
220
220 CC
Paper shredder
Switching equipment ON
5. Supplies
(190 & 200 only)
–
–
Bags for cut material
1
– Press rocker switch to pos. (1)
(Packed in dispenser carton, 50 or 100 bags
to a roll depending on size. For bag informa-
tion, see label on inside of the waste container.
If label is missing, contact Fellowes or your
local Fellowes dealer for the stock number of
the bag that fits your machine.)
• Controller switch locks in "on" position.
• Equipment is ready for operation
(standby).
– Feed paper
• The shredding process is started by
automatic start stop control in the paper
feed opening. Insert paper and
shredding begins automatically.
• When the shredding is complete, the
cutting system automatically stops
after approx. 3 seconds.
Cutting block oil for cross-cut units
Stock # 35250.
6. Installation
–
The paper shredder is supplied ready for
operation.
Operate this product only from the type of
power source indicated on the marking label.
Install the paper shredder so that the plug is
easily accessible.
Switching equipment OFF
(190 & 200 only)
–
–
–
–
– Press rocker switch to pos. (3)
• switch resets to center position and
3
Shredder must be operated in upright position
only.
stops the cutting system.
Set up paper shredder so that the ventilation
slots are unobstructed. To ensure sufficient
ventilation of the shredder a minimum distance
of 4" (10 cm) to the wall or to the furniture must
be maintained.
Switching equipment ON
(220 series only)
– Press rocker switch to pos. (1)
1
• Switch locks in "on" position.
• Equipment is ready for operation
(standby).
7. Operation
• Green LED lights.
Read operating instructions before
operating the shredder.
– Feed paper
• The shredding process is started by
photo–cells in the paper feed opening.
Insert paper and shredding begins
automatically.
• When the shredding is complete, the
cutting system automatically stops
after approx. 3 seconds.
Insert plug in power outlet.
To avoid motor overload, the 190 and
200 model paper shredders may cut
out automatically after approx. 20
minutes of continuous operation.
Switching equipment OFF
(220 series only)
– Press rocker switch to pos. (3)
• switch resets to center position and the
3
machine is turned off.
6
1.294.999.110
Edition 09/98
USA
190
200
220
Paper shredder
220 CC
8. Checklist for Inoperative Machine
Door contact interrupted
Red LED lights (220 series only).
No LED on 190 & 200 models.
If the equipment does not work properly, please
check the following points first:
– Paper shredder switches off automati-
cally. Press rocker switch to center (2)
position.
• Check whether cut material container is
properly pushed into bottom frame.
– Is the plug inserted ?
– Is the switch turned on ?
– Is waste container pushed in properly ?
– Is waste container full ?
Empty container
– Is there a paper jam in the shredder ?
See Malfunctions
– Is the motor overheated ?
Switch machine off and allow motor to
cool down for approximately 15–20 min.
2
1
• Return switch to "on" position (1) and
continue shredding.
Cut material container full
Red LED lights (220 series only).
No LED on 190 & 200 models.
If none of the above applies and the equipment still
does not run, please contact the appropriate
customer service department.
– Paper shredder switches off automati-
cally.
• Press rocker switch to center (2)
position.
9. Malfunctions
2
Paper jam
• Empty cut material container or
exchange cut material bag.
• Press rocker switch to center position
(2) to stop the cutting system.
2
• Return switch to "on" position (1) and
continue shredding.
1
• Press and hold down rocker switch in
pos. (3) to reverse the cutting system
3
and back out jammed material
(paper is pushed out)
10. Maintenance
Caution!
(Cross cut unit only)
1
Do not press rocker switch alternately
forwards/backwards in pos. (1 and 3)
3
– When tearing capacity drops or the noise
increases:
• Spray special cutting block oil onto
cutting system.
• Remove excess paper.
• Return switch to pos. (1) and continue
1
shredding in smaller quantities so as
not to jam the machine further.
• Run cutting system forward (1) and
backward (3) several times without
feeding paper.
1
3
• Continue shredding.
Edition 09/98
1.294.999.110
7
USA
190
200
220
220 CC
Paper shredder
11. Warranty
12. Customer Service
FELLOWES® POWERSHRED LIMITED
WARRANTY
United States
Fellowes Manufacturing Co.
1789 Norwood Avenue
Itasca, IL 60143
1 year on all parts and labor
Tel.: 1-800-955-0959
5 years parts and labor on cutting cylinders
Canada
Fellowes® warrants this product to be free from
defects in material and workmanship for a
period of one year from the date of purchase by
the original consumer. At it's option, Fellowes®
will repair or replace without charge for material
or labor, any component found to be defective
during the warranty period. Additionally, the
cutting cylinders are warranted for 5 years from
the original purchase date and will be replaced
without charge for material or labor if found by
Fellowes® to be defective.
Fellowes Manufacturing of Canada Ltd.
2750 John Street
Markham, Ontario L3R 2W4
Tel.: 1-800-665-4339
United Kingdom
Fellowes Manufacturing UK Ltd.
Doncaster Road
Kirk Sandall
Doncaster, South Yorkshire DN3 1HT
Tel.: 01302-885 331
Warranty Exclusions
Australia
Fellowes Manufacturing (Australia) Pty.Ltd.
10 Fellowes Court
Tullamarine, Victoria 3043
The parties agree that the buyer's sole and
exclusive remedy against Fellowes® shall be for
the repair or replacement of defective parts as
provided herein. The buyer agrees that no
other remedy (including, but not limited to,
incidental or consequential damages for lost
profits, lost sales, injury to property or any other
incidental or consequential loss) shall be
available to him. This warranty shall NOT apply
and is void under the following circumstances:
1. When this product or any part thereof has been
subjected to accident, alteration, abuse, or
misuse.
Tel.: (03) 9330-3211 in Melbourne
1-800-331-177 outside Melbourne
Nederland
Fellowes
P.O. Box 180
4130 Ed Vianen
Nederland
Tel.: 0347-377988
Germany
2. When the original Model and Serial Number
Plate has been altered, effaced or removed.
3. When repair or service covered under this
warranty (other than routine maintenance
(as described in the Owner's Manual) has been
performed by personnel without the express
written consent of Fellowes®.
Fellowes GmbH
Dieselstraße 27
D-30827 Garbsen
Tel.: 05131-49770
France
Fellowes Lynx S.A.
194 allée de la Croix des Hormes
69250 Montanay
4. When the product has been used pursuant to
any verbal or written rental, lease or loan
agreement.
Tel.: 33-72-08-25-50
THIS WARRANTY DESCRIBED HEREIN SHALL
BE IN LIEU OF ANY OTHER WARRANTY,
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. ANY REPRESENTA-
TIONS OR PROMISES INCONSISTENT WITH OR
IN ADDITION TO THIS WARRANTY ARE
UNAUTHORIZED AND SHALL NOT BE BINDING
UPON FELLOWES.
8
1.294.999.110
Edition 09/98
USA
|