Extron electronic TV Mount MBU 123 User Manual

MBU 123 Under Desk Mounting Kit and  
PMK 100 Mini Pole Mount Kit Installation Guide  
Furniture mount or projector mount the quarter-rack width product using the optional  
mounting kit (part number 70-212-01, furniture; or 70-217-01, projector) as follows:  
1. Attach the mounting brackets to the product with the machine screws provided  
(see the figure on the other side of this card).  
2. If feet were previously installed on the bottom of the unit, remove them.  
For furniture mounting —  
3. Hold the unit with the attached brackets against the underside of the table or other  
furniture. Mark the location of the screw holes of the bracket on the mounting  
surface.  
4. Drill 3/32-inch (2 mm) diameter pilot holes, 1/4 inch (6.3 mm) deep in the mounting  
surface at the marked screw locations.  
5. Insert #8 wood screws into the four pilot holes. Tighten each screw into the mounting  
surface until just less than 1/4 inch of the screw head protrudes.  
6. Align the mounting screws with the slots in the brackets and place the unit against the  
surface, with the screws through the bracket slots.  
7. Slide the unit slightly forward or back, then tighten all four screws to secure the unit in  
place.  
Extron USA - West -  
Headquarters  
Extron Europe  
Extron Asia  
Extron Japan  
Extron China  
Extron Middle East  
Extron USA - East  
+800.3987.6673  
Inside Europe Only  
+800.7339.8766  
Inside Asia Only  
+400.883.1568  
Inside China Only  
+800.633.9876  
Inside USA/Canada Only  
+800.633.9876  
Inside USA/Canada Only  
+31.33.453.4040  
+65.6383.4400  
+81.3.3511.7655  
+86.21.3760.1568  
+971.4.2991800  
+1.919.863.1794  
+1.919.863.1797 FAX  
+31.33.453.4050 FAX +65.6383.4664 FAX +81.3.3511.7656 FAX +86.21.3760.1566 FAX +971.4.2991880 FAX  
+1.714.491.1500  
68-705-01  
Rev. B  
05 11  
+1.714.491.1517 FAX  
© 2011 Extron Electronics. All rights reserved. www.extron.com  
MBU 123 Under Desk Mounting Kit and  
PMK 100 Mini Pole Mount Kit Installation Guide,  
Continued  
For projector mounting —  
1. Using a locally-supplied nut and bolt, or other appropriate hardware, secure the  
product to a projector mount or other surface by inserting the mounting hardware  
through the slotted hole in the bracket.  
Projector Mounting  
Bracket  
Mounting  
Bolt  
.5  
15V  
A
PO  
MA  
W
DU  
X
ER  
MD  
I
AL  
A
T
B
1
A
1
OU  
2
T
2
S
3
3
DISTRIBU  
TION AM  
PLIFIER  
Under Desk Mounting  
Projector Mounting  
 

Electrolux Refrigerator TR926 User Manual
Fisher Paykel Microwave Oven CMOH30SS User Manual
Fisher Price Doll C5352 User Manual
FoodSaver Food Saver V3800 User Manual
FoodSaver Food Saver Vac800 Vac820 User Manual
FujiFilm Digital Camera S8000FD User Manual
GE Washer GFWH2400L User Manual
Gianni Industries Door Z 150 User Manual
Global Machinery Company Portable Generator FCG001 User Manual
Golden Technologies Mobility Aid GP52 User Manual