EXCELL PRECISION CO., LTD.
© Excell Precision Limited 2006. All rights reserved Worldwide.
The information contained herein is the property of Excell Precision Limited and is supplied
without liability for errors or omissions. No part may be reproduced or used except as
authorised by contract or other written permission. The copyright and the foregoing
restriction on reproduction and use extend to all media in which the information may be
embodied.
ZSME200000007
EXCELL PRECISION CO., LTD.
TABLE OF CONTENT
BEFORE USING THE SCALE ........................................................................................2
INSTRUCTIONS FOR USE..........................................................................................2
PREPARING TO USE THE SCALE..............................................................................2
CHAPTER 1 INTRODUCTION........................................................................................3
1-1 FEATURES.............................................................................................................3
1-2 EXPLANATION OF DISPLAY.................................................................................4
1-3 KEY FUNCTION .....................................................................................................6
1-4 POWER SUPPLY ...................................................................................................8
CHAPTER 2 OPERATION ..............................................................................................9
2-1 MACHINE ON.........................................................................................................9
2-2 MACHINE OFF.......................................................................................................9
2-3 SCALE WITH TWO WEIGHING UNITS ...............................................................10
2-4 SCALE WITH ONE WEIGHING UNIT ..................................................................10
2-5 COUNTING...........................................................................................................12
2-6 DEDUCTION OF PACKAGE WEIGHT.................................................................14
2-7 ACCUMULATION .................................................................................................17
2-8 QUANTITY CHECK-WEIGHING..........................................................................18
2-9 CHECK-WEIGHING .............................................................................................19
2-10 ZERO FUNCTION ..............................................................................................20
2-11 BACKLIGHT FUNCTION....................................................................................20
2-12AUTO CALIBRATION .........................................................................................21
CHAPTER 3 USER INTERFACE SETTING .................................................................22
APPENDIX SPECIFICATION TABLE............................................................................28
1
EXCELL PRECISION CO., LTD.
BEFORE USING THE SCALE
To enable you to use this scale correctly, we suggest that you read this manual carefully.
INSTRUCTIONS FOR USE
1. Please keep scale in a cool and dry place. Do not store at high temperatures.
2. Do not allow any liquids to come into or contact with the scale. If it is happened, wipe the scale
dry with a cloth.
3. Avoid objects impacting with the scale. Do not drop loads onto the scale or subject the weigh
pan to any strong shock loads.
4. The load placed on the weigh pan must not exceed the maximum weighing capacity of the
scale.
5. If the scale is not going to be used for some time, please clean it and store it in a plastic bag in
dry conditions. A desiccant sachet may be included to prevent moisture build up.
PREPARING TO USE THE SCALE
1. For accurate weight readings locate the scale on a firm level surface free from vibrations.
2. Avoid operating the scale in direct sunlight or drafts of any kind.
3. Remove any weight that might be on the weigh pan before the scale is switched on and avoid
leaving weight on the pan for long periods of time.
4. Once the scale has been switched on, it will go through a LCD display test and then re-zero to
be ready for use.
5. The scale requires 15~20 minutes warming up the machine before operation to ensure best
accuracy.
6. Please note when
symbol appears on the screen, the dry batteries need to be replaced.
7. All goods weighed should be placed in the centre of the weigh pan for accurate weighing. The
overall dimensions of the goods being weighed should not exceed the dimension of the weigh
pan.
2
EXCELL PRECISION CO., LTD.
CHAPTER 1 INTRODUCTION
1-1 FEATURES
1. Up to 1/30,000 display resolution (Internal resolution 1/600,000)
2. Auto calibration
3. Kilogram (kg) and pound (lb) weighing modes
4. Full range tare, Auto zero tracking, Pre-tare
5. Data accumulations (weight and quantity)
6. Auto average unit weight, 10 preset unit weight
7. Weight and quantity over-limit warning
8. Standby function to keep the scale more stable and accurate
9. Auto temperature linearity compensation
10. Counting by sample or unit weight setting
11. Selectable sampling speed
12. Low power and charging status indication
13. Easily adjusted leveling feet for stability of the scale
3
EXCELL PRECISION CO., LTD.
1-2 EXPLANATION OF DISPLAY
SCALE WITH TWO WEIGHING UNITS:
WEIGHT
UNIT WEIGHT (per1000)
QUANTITY
.
.
.
.
.
.
.
.
→0←
.
.
3
3
3
3
3
kg
+
T
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Pcs
stable
3
SCALE WITH ONE WEIGHING UNIT:
WEIGHT
UNIT WEIGHT
QUANTITY
.
.
.
.
.
.
.
.
→0←
kg
.
.
3
3
3
3
3
3
+
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Pcs
stable
T
DIGITAL DISPLAY
1. WEIGHT: (5 digits)
To indicate the weight of objects on the platter or the accumulation of total weight , the utmost left
digit can be a negative sign “－” .
2. ♦ SCALE WITH TWO WEIGHING UNITS (lb & kg)
UNIT WEIGHT (PER 1000): (5 digits)
To indicate the unit weight ×1000pcs of objects, the decimal point can be floating.
♦ SCALE WITH ONE WEIGHING UNIT (kg or lb only)
UNIT WEIGHT: (5 digits)
To indicate the unit weight of objects, the decimal point can be floating.
3. QUANTITY: (6 digits)
To indicate the quantities of objects on the platter or totality of quantities.
4
EXCELL PRECISION CO., LTD.
INDICATION SYMBOL “3”
T
1.
: Showing after deduction of package weight (Tare).
2. →0← : Showing the scale is in zero position.
3. M+ : Accumulation.
4. Stable : Showing the scale is in stable condition.
.
.
.
.
.
5.
: If the sample weight is too small, the sign “ 3 ” will appear. In other words, the sample
should be added until the sign “ 3 ” disappear.
.
.
.
.
.
6.
: If the unit weight of the object is too small, the sign “ 3 ” will appear. Under this status, the
scale can still work but may result a deviation of the accuracy.
Pcs
5
EXCELL PRECISION CO., LTD.
1-3 KEY FUNCTION
1. 0 - 9 key and the decimal point
: For setting the unit weight, total count & package weight.
2. CE : Press this key to clear all input digits.
3. →0← : Press this key , the display will return to 0.
4. HIGH PRECISION COUNTING SCALE:
T
: Press this key to deduct the weight of container and also with “STANDBY” function.
STANDARD COUNTING SCALE:
T
: Press this key to deduct the weight of container.
: For setting the sample count.
.
.
.
.
.
.
R
.
.
.
.
5.
6.
7.
R
: For setting the unit weight of sample.
: For pre-setting the upper limit of count. If the calculated count is larger than the limit, the
scale will send a warning sound.
8. SCALE WITH TWO WEIGHING UNITS:
lb/kg : Press this key to choose the weighing units.
SCALE WITH ONE WEIGHING UNIT ( “kg” or “lb” only ):
U.W.
PST
: Press this key to preset the unit weight of sample.
6
EXCELL PRECISION CO., LTD.
.
.
.
.
.
.
.
.
+
.
.
9.
: Press this key, the total count including the previous calculation will be stored in the
memory.
10.
: For clearing the stored memory.
7
EXCELL PRECISION CO., LTD.
1-4 POWER SUPPLY
ALTERNATIVE POWER SUPPLIES
1. AC 115V ± 10%
2. AC 230V ± 10%
3. 4Ah internal rechargeable battery
4. 10Ah internal rechargeable battery
POWER CONSUMPTION
About DC 25 mA (without internal rechargeable battery)
About DC 30 mA (with internal rechargeable battery)
LOW BATTERY WARMING
When
appears in the right corner of the WEIGHT display, the battery needs recharging.
When the low battery sign is shown, if the scale can’t be charged in time, the power will be auto-cut
after 20~30 Hours operation and enter the protection mode for the battery. The scale should be
recharged for turn on again.
8
EXCELL PRECISION CO., LTD.
CHAPTER 2 OPERATION
2-1 MACHINE ON
Turn on machine by pressing ON/OFF power switch. Then, the display will count down and
revert to zero.
F If the machine is equipped with “PRINTER & RS232” options, the display will appear the card no.
and revert to zero.
2-2 MACHINE OFF
Turn off machine by pressing ON/OFF power switch.
F The “High Precision Counting Scale” can also be switched standby key (
).
T
Please press
while. In this way, the machine can be kept in a warm-up condition. When you continue to use
the scale, press key once more, the scale will be on again.
key until display appears “
” if you don‘t use the scale for a short
T
«Use the standby key only let you save warm-up time before operation. But please be reminded
that the power is still in the consumption when you press “standby” key. If you don’t use the
scale for a long period of time, you’d better to turn the main power off by the ON / OFF switch.
9
EXCELL PRECISION CO., LTD.
2-3 SCALE WITH TWO WEIGHING UNITS
UNIT SELECTION:
Press lb/kg to choose the weighing unit and the display will be shown “kg” or “lb”.
♦ The unit status will be memorized.
2-4 SCALE WITH ONE WEIGHING UNIT
[[[ “kg” or “lb” only
UNIT WEIGHT PRESET:
A. How to preset the unit weight:
(1) Use 0 ~ 9 to key in the unit weight.
→0← 3
.
Stable 3
U.W.
(2) Press
key.
key.
PST
→0← 3
Stable 3
U.W.
PST
(3) Press
→0← 3
Stable 3
(4) Press one of the key 0 ~ 9 to preset the unit weight.
→0← 3
.
Stable 3
10
EXCELL PRECISION CO., LTD.
B. How to recall the preset unit weight:
U.W.
PST
(1) Press
key.
→0← 3
Stable 3
(2) Press one of the key 0 ~ 9 to recall the preset weight.
→0← 3
.
Stable 3
F«When scale with two weighing units, the number of “UNIT WEIGHT (PER1000)” display is unit
weight ×1000pcs of the object on platter.
«When scale with one weighing unit, the number of “UNIT WEIGHT” display is unit weight of the
object on platter.
11
EXCELL PRECISION CO., LTD.
2-5 COUNTING
In order to obtain the unit weight of the sample, carry out the sampling formalities before counting.
There are two ways as follow:
A. The unit weight of the object to be weighed is unknown:
(1) Put the sample on platter.
.
the weight of the sample
(2) Key in the number of sample which put on the platter.
.
ï
the weight of the sample
the number of keyin
.
.
.
.
.
R
.
.
.
.
.
(3) Press
key.
- - - - - -
.
the weight of the sample
(4) When the scale is stable, it is finished for sampling and enters in the counting mode.
.
.
Stable 3
the weight of the sample
unit weight× 1000 pcs
the Q’ty of the sample
(if scale with two weighing units, the display will show 1000 pcs’ weight)
(if scale with one weighing unit, the display will show“unit weight”)
12
EXCELL PRECISION CO., LTD.
B. The unit weight of the object to be weighed is known:
(1) Key in the weight value of 1000 pcs (unit weight × 1000 pcs).
(If scale with one weighing unit, please key in the unit weight.)
→0← 3
.
.
ï
Stable 3
unit weight× 1000 pcs
R
(2) Press
key.
→0← 3
.
.
Stable 3
unit weight × 1000 pcs
♦ When both columns in “UNIT WEIGHT (PER 1000)” & “QUANTITY” are in zero, pressing
.
.
.
R
.
.
.
R
.
.
.
.
and
key can recall the latest weight value of 1000 pcs.
♦ If the sampling size is larger, the unit weight will be more accurate.
♦ PIECE WEIGHT TOO SMALL (
)
Pcs
High Precision Counting Scale: If piece weight less than 1/5 of a division.
Standard Counting Scale: If piece weight less than 4/5 of a division.
.
.
.
.
.
.
♦ SAMPLE TOO SMALL (
)
.
.
.
.
High Precision Counting Scale:
If sample weight less than 20 divisions.
Standard Counting Scale:
If sample weight less than 40 divisions.
FSuch condition as above-mentioned, the scale still works, but may result in a deviation of the
accuracy.
13
EXCELL PRECISION CO., LTD.
2-6 DEDUCTION OF PACKAGE WEIGHT
T
Initiates a tare or cancels a tare.
There are two ways as follow:
A. The weight of the container is unknown (Tare):
(1) Put the container on the platter.
.
the weight of the container
T
(2) Press
key.
- - - - -
- - - - - -
(3) When the scale is stable and enters the counting mode.
→0← 3
.
Stable 3
T
3
14
EXCELL PRECISION CO., LTD.
B. The weight of the container is known (Pre-Tare):
Please refer to page 23 “B. Set the form of “pre-tare” function” first and pre-set the function to “0” or
“1”.
B-1) Setting “0” for the form of “pre-tare” :
(1) There is no object on the platter.
→0← 3
.
Stable 3
T
(2) Press
key.
→0← 3
- - - - - -
- - - - - -
.
Stable 3
(3) Key in the weight value of the container.
→0← 3
.
Stable 3
the weight of key in
T
(4) Press
key.
- - - - - -
-
.
T
Stable
3
3
15
EXCELL PRECISION CO., LTD.
B-2) Setting “1” for the form of “pre-tare”:
(1) There is object on the platter.
.
.
Stable 3
the weight on platter
unit weight× 1000 pcs
the Q’ty on platter
(if scale with two weighing units, the display will show 1000 pcs’ weight)
(if scale with one weighing unit, the display will show“unit weight”)
(2) Key in the weight value of the container.
.
.
ï
Stable 3
T
(3) Press
key.
.
.
T
Stable
3
3
the net weight excluding container
unit weight × 1000 pcs
the Q’ty excluding container
(if scale with two weighing units, the display will show 1000 pcs’ weight)
(if scale with one weighing unit, the display will show“unit weight”)
FWhen no load on the scale and the WEIGHT display shows the negative value of the
T
container’s weight, press
again can make the display revert to zero. The sign “ k ” of
T
“
”will disappear at this moment.
16
EXCELL PRECISION CO., LTD.
2-7 ACCUMULATION
(1) Put object on the platter.
.
.
the present weight on platter
unit weight× 1000 pcs
the present Q’ty on platter
(if scale with two weighing units, the display will show 1000 pcs’ weight)
(if scale with one weighing unit, the display will show“unit weight”)
.
.
.
.
.
.
.
.
.
.
(2) Press
key.
- - - - -
- - - - - -
(3) When the scale is stable.
3
+
.
Stable 3
the total weight of accumulation the total accumulative number
the total Q’ty of accumulation
(4) After 3 seconds, the scale will return to the counting mode.
3
+
.
.
Stable 3
the present weight on platter
unit weight× 1000 pcs
the present Q’ty on platter
(if scale with two weighing units, the display will show 1000 pcs’ weight)
(if scale with one weighing unit, the display will show“unit weight”)
F «The maximum accumulation is up to 99 times and the maximum display digits is 6 only.
«Pressing
key can clear all accumulated count in the memory, and the sign “3” of “M+”
will disappear.
17
EXCELL PRECISION CO., LTD.
2-8 QUANTITY CHECK-WEIGHING
If the quantity on the scale is over the preset quantity, the beep will sound and the UNIT WEIGHT
(PER 1000) display will show - .
and flash.
SETTING MAXIMUM LIMIT OF QUANTITY:
(1) Press
key (when the scale is loaded or unload).
→0← 3
- - - -
Stable
3
the latest preset quantity
(2) Key in the maximum limit (Use CE key to make any change).
→0← 3
- - - -
Stable
3
(The value of maximum quantity)
.
.
.
.
.
R
.
.
.
.
.
(3) Press
key (Use CE key to make any change).
→0← 3
- - - -
Stable
3
(4) Press
key, the scale will return to the counting mode.
→0← 3
.
Stable
3
18
EXCELL PRECISION CO., LTD.
2-9 CHECK-WEIGHING
If the weight on the platter is over the preset weight, the beep will sound and the UNIT WEIGHT
(PER 1000) display will show
and flash.
SETTING MAXIMUM LIMIT OF WEIGHT:
(1) Press
key (when the scale is loaded or unload).
→0← 3
- - - -
Stable
3
the latest preset weight
(2) Key in the maximum limit (Use CE key to make any change).
→0← 3
- - - -
Stable
3
The value of maximum weight (100=10.0)
FThe weighing unit and decimal of the maximum weight value which you input should be same as
WEIGHT display.
R
(3) Press
key (Use CE key to make any change).
→0← 3
- - - -
Stable
3
(4) Press
key, the scale will return to the counting mode.
→0← 3
.
Stable
3
19
EXCELL PRECISION CO., LTD.
CLEARING MAXIMUM LIMIT OF QUANTITY OR WEIGHT:
Clearing maximum limit of quantity or weight, please do the same procedure as above step by step
(In procedure (2), key in “0” instead of the other numbers).
2-10 ZERO FUNCTION
There may sometimes be happened Zero point shifts during operating the scale (some minor
weight would still appear on the display visor although nothing placed on the scale).
Press →0← to reset the display if the reading is not at zero.
F The range of the zero key is 4% (±2%) of the full capacity.
(High Precision Counting Scale will take more time to get “Zero” display.)
2-11 BACKLIGHT FUNCTION
To initiate the backlight function:
♦ Press →0← followed by 5 to set up the Auto-Backlight. When the scale is loaded (must be
over 10d) or pressing any key of keyboard, the backlight will be on. The backlight will be off
automatically 5 seconds after the displays return to zero.
♦ Press →0← followed by 4 . The backlight will be on all the time.
To cancel the backlight function:
Press →0← followed by 6 to cancel the backlight.
FThe backlight status will be memorized when the next turn on.
20
EXCELL PRECISION CO., LTD.
2-12 AUTO CALIBRATION
(1) When the displays are zero, press . key then lb/kg key at the same time. Don‘t release your
fingers from the keys until the weight display is appeared “ - - - - - ”.
→0← 3
.
.
Stable
3
the value of full capacity of the scale
(2) Put the mass (full capacity) on the platter. The scale will be calibrated automatically when it is
stable. While the scale is reverting to zero, please take the mass away from the platter.
♦ Press CE can escape from the calibration mode.
F When the display appears the value of full capacity, you can directly input the value of the
weight which you want to calibrate. Then, place the mass (calibrated weight) on the platter.
The scale will be calibrated automatically when it is stable.
RECALL THE ORGINAL VALUES OF CALIBRATION
If there is something wrong with the auto calibration, press CE then lb/kg at the same time.
Release your finger from the lb/kg then CE key while the scale is counting down. The scale will
return to the original values of which had been calibrated in factory.
U.W.
PST
♦ If scale with one weighing unit, please use
key to instead of lb/kg key.
21
EXCELL PRECISION CO., LTD.
CHAPTER 3 USER INTERFACE SETTING
There are 6 kinds of interface modes for user to free-setting.
.
.
.
.
.
.
.
.
+
.
.
A. Set the appearance of
function.
(1) Press →0← key.
→0← 3
- - - - -
- - - - - -
Stable
3
(2) Press 1 to enter the setting mode.
(3) Press 1 key.
X
Please choose 0,1 or 2 by pressing 0 , 1 or 2 key
.
.
.
.
.
.
.
.
+
0: The total value in memory will be shown on the display for 3 seconds while pressing
key.
.
.
1: The total value in memory is shown on the display and will not disappear until pressing CE key.
.
.
.
.
.
.
.
.
.
.
2: While pressing the
key, the total value in memory will not be shown on the display
(hidden) but only has a beep.
If to abandon and escape from the setting mode, press . key.
22
EXCELL PRECISION CO., LTD.
B. Set the form of “pre-tare” function.
(1) Press →0← key.
→0← 3
- - - - -
- - - - - -
Stable
3
(2) Press 1 to enter the setting mode.
(3) Press 2 key.
X
Please choose 0 or 1 by pressing 0 or 1 key
0 : The tare value can not be preset when the scale is loaded.
1 : The tare value can be preset when the scale is loaded or unload.
Factory setting ⇒ 1
If to abandon and escape from the setting mode, press . key.
23
EXCELL PRECISION CO., LTD.
C. Set the form of
function
(1) Press →0← key.
→0← 3
- - - - -
- - - - - -
Stable
3
(2) Press 1 to enter the setting mode.
(3) Press 3 key.
X
.
Function reservation!
If to abandon and escape from the setting mode, press . key.
24
EXCELL PRECISION CO., LTD.
.
.
.
.
.
.
.
.
.
.
D. Set the action of
function
(1) Press →0← key.
→0← 3
- - - - -
- - - - - -
Stable
3
(2) Press 1 to enter the setting mode.
(3) Press 4 key.
X
Please choose 0 or 1 by pressing 0 or 1 key
.
.
.
.
.
.
.
.
+
.
.
0: The
function can only be used when scale is stable.
.
.
.
.
.
.
.
.
+
.
.
1: However stability it is, the
function can be used.
Factory setting ⇒ 0
If to abandon and escape from the setting mode, press . key.
25
EXCELL PRECISION CO., LTD.
.
.
.
.
.
.
.
.
.
.
E. Set the next action of
function
(1) Press →0← key.
→0← 3
- - - - -
- - - - - -
Stable
3
(2) Press 1 to enter the setting mode.
(3) Press 5 key.
X
Please choose 0 or 1 by pressing 0 or 1 key
.
.
.
.
.
.
.
.
.
.
0: The
1: The
function can not work for the next until the displays show zero.
function can work for the next accumulation at any time or condition.
.
.
.
.
.
.
.
.
.
.
Factory setting ⇒ 0
If to abandon and escape from the setting mode, press . key.
26
EXCELL PRECISION CO., LTD.
F. How to set the speed of sampling and zero range
The speed of sampling:
The speed setting is from 01~15. The smaller number you set, the slower speed for sampling is.
The slower speed you set, the scale will show more accurate. If faster speed you set, the scale will
sacrifice the accuracy.
Factory setting for sampling is ⇒ 01
Zero display range:
Zero display range: 0 ⇒ Normal standard status
1 ⇒ The 1st division hidden, not appeared
Factory setting for zero range ⇒ 1
(1) Press →0← key followed by 8 key.
XX
Please use 6 or 4 key to input “0” or “1” .
(0)
(1)
Please use 8 or 2 key to choose the number 01~15 of speed you need.
(#)
($)
(2) Press
key, the scale will return to the counting mode.
→0← 3
.
Stable
3
27
EXCELL PRECISION CO., LTD.
APPENDIX SPECIFICATION TABLE
Standard counting scale:
External resolution: 1/6000
CAPACITY
DIVISION
MINIMUM RESOLUTION
300 g
600 g
1.2 kg
3 kg
0.05 g
0.1 g
0.2 g
0.5 g
1 g
0.01 g
0.02 g
0.04 g
0.1 g
0.2 g
0.4 g
1 g
6 kg
12 kg
30 kg
60 kg
120 kg
300 kg
600 kg
2 g
5 g
10 g
20 g
50 g
100 g
2 g
4 g
10 g
20 g
High precision counting scale:
External resolution: 1/15000
CAPACITY
DIVISION
MINIMUM RESOLUTION
300 g
1.5 kg
3 kg
0.02 g
0.1 g
0.2 g
0.5 g
1 g
0.001 g
0.005 g
0.01 g
0.025 g
0.05 g
0.1 g
7.5 kg
15 kg
30 kg
75 kg
150 kg
300 kg
2 g
5 g
0.25 g
0.5 g
10 g
20 g
1 g
28
EXCELL PRECISION CO., LTD.
External resolution: 1/30000
CAPACITY
DIVISION
MINIMUM RESOLUTION
300 g
600 g
3 kg
0.01 g
0.02 g
0.1 g
0.2 g
1 g
0.0005 g
0.001 g
0.005 g
0.01 g
0.05 g
0.1 g
6 kg
30 kg
60 kg
300 kg
600 kg
2 g
10 g
20 g
0.5 g
1 g
29
|